Selectingtreble frequency
You can select the treble frequency for level
adjustment.
1 Press AUDIO and hold until frequency
and the Q factor (e.g., F- 80:Q1W) appears
in the display.
2 Press AUDIO to select T.
Press
AUDIO
until
T
appears in the display.
3 Press
c
or
d
to select the desired fre-
quency.
Press
c
or
d
until the desired frequency ap-
pears in the display.
2k
4k
6k
10k
(Hz)
Adjustingloudness
Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.
1 Press AUDIO to select LOUD.
Press
AUDIO
until
LOUD
appears in the dis-
play.
2 Press
a
to turn loudness on.
Loudness level (e.g.,
LOUD :MID
) appears in
the display.
3 Press
c
or
d
to select a desired level.
Each press of
c
or
d
selects level in the fol-
lowing order:
LOW
(low)
MID
(mid)
HI
(high)
4 Press
b
to turn loudness off.
LOUD :OFF
appears in the display.
Usingsubwoofer output
This unit is equipped with a subwoofer output
which can be turned on or off.
1 Press AUDIO to select SUB, W.
Press
AUDIO
until
SUB, W
appears in the dis-
play.
#
When the subwoofer controller setting is
P/O :FUL
, you cannot select
SUB, W
.
2 Press
a
to turn subwoofer output on.
SUB, W:NOR
appears in the display. Subwoo-
fer output is now on.
#
If the subwoofer output phase has been set to
the reverse,
SUB, W:REV
will be displayed.
#
To turn subwoofer output off, press
b
.
3 Press
c
or
d
to select the phase of sub-
woofer output.
Press
c
to select reverse phase and
REV
ap-
pears in the display. Press
d
to select normal
phase and
NOR
appears in the display.
Adjustingsubwoofer settings
When the subwoofer output is on, you can ad-
just the cut-off frequency and the output level
of the subwoofer.
1 Press AUDIO to select 80: 0.
Press
AUDIO
until
80: 0
appears in the dis-
play.
#
When the subwoofer output is on, you can se-
lect
80: 0
.
#
If the subwoofer setting has been previously
adjusted, the frequency of that previously se-
lected will be displayed instead of
80
.
2 Press
c
or
d
to select cut-off frequency.
Each press of
c
or
d
selects cut-off frequen-
cies in the following order:
50
80
125
(Hz)
Only frequencies lower than those in the se-
lected range are output from the subwoofer.
Audio Adjustments
En
42
Section
09
