Black plate (10,1)
!
External unit refers to a Pioneer product (such
as one available in the future) that, although
incompatible as a source, enables control of
basic functions by this unit. Two external units
can be controlled by this unit. When two exter-
nal units are connected, the allocation of
them to external unit 1 or external unit 2 is
automatically set by this unit.
!
When this unit
’
s blue/white lead is connected
to the vehicle
’
s auto-antenna relay control
terminal, the vehicle
’
s antenna extends when
this unit
’
s source is turned on. To retract the
antenna, turn the source off.
Adjusting the volume
%
Use MULTI-CONTROL to adjust the
sound level.
Tuner
Basic Operations
Important
If you are using this unit in North, Central or
South America, reset the AM tuning step (see
Setting the AM tuning step
on page 25).
6
6
6
1
1
1
1 2
2
2
2
4
4
4
4
5
5
5
5
3
3
3
1
Band indicator
2
Stereo (
5
) indicator
Shows when the selected frequency is being
broadcast in stereo.
3
LOC
indicator
Shows when local seek tuning is on.
4
Preset number indicator
5
Signal level indicator
Shows the radio wave strength.
6
Frequency indicator
1
Press SOURCE to select the tuner.
2
Press BAND to select a band.
Press
BAND
until the desired band is dis-
played,
FM-1
,
FM-2
,
FM-3
for FM or
AM
.
3
To perform manual tuning, push
MULTI-CONTROL left or right.
4
To perform seek tuning, push and hold
MULTI-CONTROL left or right for about one
second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
#
You can cancel seek tuning by pushing
MULTI-CONTROL
left or right.
<XRD7144-A/N>10
Operating this unit
En
10
Section
02
