Black plate (13,1)
Disc loading slot
EJECT
button
#
To avoid a malfunction, make sure that no
metal object comes into contact with the term-
inals when the front panel is open.
2
Insert a CD (CD-ROM) into the disc load-
ing slot.
Playback will automatically start.
#
Be sure to turn up the label side of a disc.
#
After a CD (CD-ROM) has been inserted, press
SOURCE
to select the built-in CD player.
#
You can eject a CD (CD-ROM) by pressing
EJECT
.
3
Close the front panel.
4
Push MULTI-CONTROL up or down to
select a folder when playing a compressed
audio.
#
You cannot select a folder that does not have
a compressed audio file recorded in it.
#
To return to folder 01 (ROOT), press and hold
BAND
. However, if folder 01 (ROOT) contains no
files, playback commences with folder 02.
5
To perform fast forward or reverse,
push and hold MULTI-CONTROL left or
right.
#
If you select
Rough search
, pushing and hold-
ing
MULTI-CONTROL
left or right enables you to
search every 10 tracks in the current disc (folder).
(Refer to
Searching every 10 tracks in the current
disc or folder
on page 15.)
6
To skip back or forward to another
track, push MULTI-CONTROL left or right.
Notes
!
There is sometimes a delay between starting
up disc playback and the sound being issued.
When being read,
Format read
is displayed.
!
If an error message such as
ERROR-11
is dis-
played, refer to
Understanding error messages
on page 51.
!
When playing CD-EXTRA or MIXED-MODE
CDs, compressed audio and CD-DA can be
switched by pressing
BAND
.
!
If you have switched between compressed
audio and CD-DA, playback starts at the first
track on the disc.
!
When playing back VBR (variable bit rate) re-
corded files, elapsed play time may not be dis-
played correctly.
!
When playing compressed audio, there is no
sound on fast forward or reverse.
!
Playback is carried out in order of file number.
Folders are skipped if they contain no files. (If
folder 01 (ROOT) contains no files, playback
commences with folder 02.)
Selecting a track directly
When using the remote control, you can select
a track directly by entering the desired track
number.
!
When audio files are being played back,
you can select track in the current folder.
1
Press DIRECT.
Track number input display appears.
2
Press 0 to 9 buttons to enter the desired
track number.
#
You can cancel the input number by pressing
CLEAR
.
3
Press DIRECT.
The track of entered number will play.
#
After entering the number input mode, if you
do not perform an operation within about eight
seconds, the mode is automatically canceled.
<XRD7144-A/N>13
Operating this unit
En
13
English
Section
02
