Black plate (44,1)
Notes
!
When the multi-CD player performs the pre-
paratory operations,
Ready
is displayed.
!
If an error message such as
ERROR-11
is dis-
played, refer to the multi-CD player owner
’
s
manual.
!
If there are no discs in the multi-CD player ma-
gazine,
No Disc
is displayed.
Selecting a track directly
The operation is basically the same as that of
the built-in CD player.
For details concerning operation, refer to
Se-
lecting a track directly
on page 13.
Introduction of advanced
operations
You can use
Compression
(compression and
DBE) only with a multi-CD player that supports
them.
1
Press MULTI-CONTROL to display the
main menu.
FUNCTION
,
AUDIO
and
ENTERTAINMENT
appear on the display.
2
Use MULTI-CONTROL to select
FUNCTION.
Turn to change the menu option; press to se-
lect.
The function name appears on the display.
3
Turn MULTI-CONTROL to select the
function.
Turn
MULTI-CONTROL
to switch between the
functions in the following order:
Play mode
(repeat play)
—
Random mode
(random play)
—
Scan mode
(scan play)
—
Pause
(pause)
—
Compression
(compression
and DBE)
—
ITS play mode
(ITS play)
—
ITS memo
(ITS programming)
—
TitleInput "A"
(disc title input)
#
You can also select the function by pressing
FUNCTION
on the remote control.
#
To return to the playback display, press
BAND
.
#
If you do not operate functions except for
ITS memo
and
TitleInput "A"
within about 30
seconds, the display is automatically returned to
the ordinary display.
Function and operation
Play mode
,
Random mode
,
Scan mode
,
Pause
,
Compression
and
TitleInput "A"
op-
erations are basically the same as that of the
built-in CD player.
Function name
Operation
Play mode
Refer to
Selecting a repeat play
range
on page 14.
But the repeat play ranges you can
select are different from that of the
built-in CD player. The repeat play
ranges of the multi-CD player are
as below:
!
M-CD repeat
–
Repeat all
discs in the multi-CD player
!
Track repeat
–
Repeat just the
current track
!
Disc repeat
–
Repeat the cur-
rent disc
Random mode
Refer to
Playing tracks in random
order
on page 14.
Scan mode
Refer to
Scanning folders and
tracks
on page 14.
Pause
Refer to
Pausing disc playback
on
page 15.
Compression
Refer to
Using compression and
BMX
on page 15.
Multi-CD player has DBE (dynamic
bass emphasis) function instead
of BMX.
The settings can be switched as
below:
COMP OFF
—
COMP 1
—
COMP 2
—
COMP OFF
—
DBE 1
—
DBE 2
ITS play mode
Refer to
Using ITS playlists
on the
next page.
ITS memo
Refer to
Using ITS playlists
on the
next page.
TitleInput "A"
Refer to
Entering disc titles
on
page 15.
<XRD7144-A/N>44
Available accessories
En
44
Section
03
