57
Audio Adjustment
Non-Fading Output Level Adjustment (Non Fad
E
-2)
When the Non-Fading output is ON, you can adjust the level of Non-Fading output.
Note:
• You can select the Non-Fading Output setting mode only when Non-Fading output is switched ON
in the Non-Fading Output ON/OFF mode.
High Pass Filter (High Pass)
When you do not want sound in the Subwoofer output frequency range output from the
front or rear speakers, switch the High Pass Filter ON. Only higher frequencies than those
in the selected range are output from the front and rear speakers.
1. Press the AUDIO button and select the High Pass Filter mode (High Pass) in
the Audio Menu.
3. Select the desired frequency
with the
2
/
3
buttons.
50
+
=
80
+
=
125 (Hz)
2. Switch the High Pass Filter
function ON/OFF with the
5
/
∞
buttons.
Precaution:
• You can’t switch F.I.E. function and High Pass Filter function ON at the same time.
2. Increase or decrease the output
level with the
5
/
∞
buttons.
The display shows “0” – “–15”.
1. Press the AUDIO button and select the Non-Fading Output setting mode
(Non Fad
E
-2) in the Audio Menu.
