3
Push MULTI-CONTROL up or down to
set the date.
Pushing
MULTI-CONTROL
up will increase
the selected day, month or year. Pushing
MULTI-CONTROL
down will decrease the se-
lected day, month or year.
Setting the clock
Use these instructions to set the clock.
1
Use MULTI-CONTROL to select Clock.
Clock
appears in the display.
2
Push MULTI-CONTROL left or right to
select the segment of the clock display you
wish to set.
Pushing
MULTI-CONTROL
left or right will se-
lect one segment of the clock display:
Hour
—
Minute
As you select segments of the clock display
the segment selected will blink.
3
Push MULTI-CONTROL up or down to
set the clock.
Pushing
MULTI-CONTROL
up will increase
the selected hour or minute. Pushing
MULTI-CONTROL
down will decrease the se-
lected hour or minute.
Notes
!
You can match the clock to a time signal by
pressing
MULTI-CONTROL
.
—
If the minute is
00
to
29
, the minutes are
rounded down. (e.g.,
10:18
becomes
10:00
.)
—
If the minute is
30
to
59
, the minutes are
rounded up. (e.g.,
10:36
becomes
11:00
.)
!
Even when the sources are off, the clock dis-
play appears on the display. Pressing
CLOCK
when the sources and feature demo are off,
turns the clock display on or off.
Turning the off clock
display on or off
If the off clock display is turned on, when the
sources and the feature demo are off, the ca-
lendar and the clock display appears on the
display.
1
Use MULTI-CONTROL to select
Off clock.
Off clock
appears in the display.
2
Press MULTI-CONTROL to turn the off
clock display on.
ON
appears in the display.
#
To turn the off clock display off, press
MULTI-CONTROL
again.
Setting the FM tuning step
Normally the FM tuning step employed by
seek tuning is 50 kHz. When AF or TA is on,
the tuning step automatically changes to 100
kHz. It may be preferable to set the tuning step
to 50 kHz when AF is on.
1
Use MULTI-CONTROL to select
FM tuning step.
FM tuning step
appears in the display.
2
Press MULTI-CONTROL to select the FM
tuning step.
Pressing
MULTI-CONTROL
repeatedly will
switch the FM tuning step between 50 kHz
and 100 kHz while AF or TA is on. The selected
FM tuning step will appear in the display.
Initial Settings
En
94
Section
15
Summary of Contents for DEH-P9800BT - Radio / CD
Page 2: ...En 2 ...
