10
En
First, make a Bluetooth connection with the Bluetooth telephone (page 9). Up to two
Bluetooth telephones can be connected simultaneously.
Important
•
Leaving the unit on standby to connect to your phone via Bluetooth while the engine is not running
can drain the vehicle’s battery.
•
Be sure to park your vehicle in a safe place and apply the parking brake before operation.
To make a phone call
1
Press
to display the phone menu.
When two phones are connected, a phone name appears first then a phone menu
will display. To switch to another phone, press
again.
2
Turn the
M.C.
dial to select [MISSED], [DIALLED], [RECEIVED] or [PHONE BOOK],
then press to confirm.
The phone number list appears.
3
Turn the
M.C.
dial to select a name or phone number, then press to confirm.
The phone call starts.
To answer an incoming call
1
Press
when a call is received.
TIP
When two phones are connected to the unit via Bluetooth and there is an incoming call while one
phone is being used for a call, a message will appear in the display. To answer that incoming call, you
need to end the existing call.
Basic operations
To preset phone numbers
1
Select a phone number from a phone book or call history.
2
Press and hold one of the number buttons (
1
/
to
6
/
).
The contact is stored in the selected preset number.
To make a call using a preset number, press one of the number buttons (
1
/
to
6
/
),
then press the
M.C.
dial.
Voice recognition (Only for iPhone)
This function is only available when an iPhone equipped with voice recognition is
connected to the unit via Bluetooth.
1
Press and hold the
M.C.
dial to activate the voice recognition mode.
2
Press the
M.C.
dial and then talk into the microphone to input voice commands.
To exit the voice recognition mode, press
BAND
/
.
NOTE
For details on the voice recognition features, refer to the manual supplied with your iPhone.
Phone menu
Bluetooth telephone
Purpose
Operation
End a call
Press
.
Reject an incoming call
Press and hold
when a call is received.
Switch between the current caller
and a caller on hold
Press the
M.C.
dial.
Cancel a caller on hold
Press and hold
.
Adjust the volume of the caller’s
voice (When private mode is on,
this function is not available.)
Turn the
M.C.
dial during the call.
Turn the privacy mode on or off
Press
BAND
/
during the call.
Menu Item
Description
MISSED
Display the missed call history.
DIALLED
Display the dialed call history.
RECEIVED
Display the received call history.
PHONE BOOK
*1
Display the contacts which have been transferred from your
phone. Set [VISIBLE] in the connection menu to [ON] to browse
the contacts via this unit.
PRESET 1-6
Recall the preset phone numbers. You can also recall the preset
phone numbers by pressing one of the number buttons (
1
/
to
6
/
).
PHONE FUNC
Select [ON] to answer an incoming call automatically.
A.ANSR*2:
[ON], [OFF]
