manualshive.com logo in svg

Pioneer DR-706S, Reference Manual

The Pioneer DR-706S Operating Instructions Manual is a comprehensive user manual for this high-performance device. With step-by-step instructions and clear illustrations, this manual ensures hassle-free operation. Easily download this manual for free from our website, and unleash the full potential of your Pioneer DR-706S device.

Share
Download
background image

CD-ROM SCSI-2 COMMAND REFERENCE MANUAL VERSION 3.1 (OB-U0077C)

- 42 -

T

ABLE 

2-9-1B E

RROR 

R

ECOVERY 

D

ESCRIPTIONS 

(

CONTINUED

)

Value

Description

21h

Only retries of the read operation and CIRC are used (layered error correction is not
used). Only CIRC unrecovered data errors are reported. If an CIRC unrecovered data
error occurs data transfer is terminated with Check Condition status. The block with
the error is transferred. The sense key is set to Medium Error. The information bytes
give the address of the block where the unrecovered error was detected. Recovered
errors are not reported.

24h

The maximum error recovery procedures available are used. Recovered data errors
are reported. If a recovered data error occurs data transfer is not terminated.
However, when the data transfer has completed Check Condition status is reported.
The sense key is set to Recovered Error. The information bytes give the address of
the last block where a recovered data error was detected. If a data error occurs which
is uncorrectable with the ECC information available on the media data transfer is
terminated and Check Condition status is reported. The block with the error is
transferred. The sense key is set to Medium Error. The information bytes give the
address of the block where the uncorrectable error was detected.

25h

Only retries of the read operation and CIRC are used (layered error correction is not
used). Recovered data errors are reported. If a recovered data error occurs, data
transfer is not terminated. However, when the data transfer has completed Check
Condition status is reported. The sense key is set to Recovered Error. The information
bytes give the address of the last block where an CIRC recovered data error was
detected. If an unrecovered data error occurs, data transfer is terminated and Check
Condition status is reported. The block with the error is transferred. The sense key is
set to Medium Error. The information bytes give the address of the block where the
unrecovered error was detected.

26h

The maximum error recovery procedures are used. Recovered data errors are
reported.  If a recovered data error occurs, data transfer is terminated and Check
Condition status is reported. The block with the recovered error is transferred. The
sense key is set to Recovered Error. The information bytes give the address of the
block where the recovered data error was detected. If a data error occurs which is
uncorrectable with the ECC information on the media, data transfer is terminated
with Check Condition status. The block with the error is transferred. The sense key is
set to Medium Error. The information bytes give the address of the block where the
uncorrectable error was detected.

27h

Only retries of the read operation are used (layer error correction is not used). CIRC
recovered data errors are reported. If a CIRC recovered data error occurs, data
transfer is terminated with Check Condition status. The block with the recovered
error is transferred. The sense key is set to Recovered Error. The information bytes
give the address of the block where the recovered data error was detected. If an CIRC
unrecovered data error occurs, data transfer is terminated with Check Condition
status. The block with the error is transferred. The sense key is set to Medium Error.
The information bytes give the address of the block where the unrecovered error was
detected.

Summary of Contents for DR-706S






























































































































































































Reviews:

No comments

Related manuals for DR-706S

D-Link DMP-210 - 32 MB Digital Player Quick Install Manual preview
DMP-210 - 32 MB Digital Player
Brand: D-Link Pages: 8
Samsung DVD-P401 User Manual preview
DVD-P401
Brand: Samsung Pages: 39
Samsung DVD-P721M Manuel preview
DVD-P721M
Brand: Samsung Pages: 26
Samsung DVD-P350K Instruction Manual preview
DVD-P350K
Brand: Samsung Pages: 59
Samsung DVD-P250K Manual Del Usuario preview
DVD-P250K
Brand: Samsung Pages: 60
Samsung DVD-P250K User Manual preview
DVD-P250K
Brand: Samsung Pages: 60
Samsung DVD-P246A Manual preview
DVD-P246A
Brand: Samsung Pages: 18
Samsung DVD-P243 Manual Del Usuario preview
DVD-P243
Brand: Samsung Pages: 17
Samsung DVD-P181 User Manual preview
DVD-P181
Brand: Samsung Pages: 32
Samsung DVD-P171 User Manual preview
DVD-P171
Brand: Samsung Pages: 32
Samsung DVD-P171 Owner'S Instructions Manual preview
DVD-P171
Brand: Samsung Pages: 92
Samsung DVD-P410 User Manual preview
DVD-P410
Brand: Samsung Pages: 18
Samsung DVD-P148 Manual preview
DVD-P148
Brand: Samsung Pages: 19
Samsung DVD-P145 Manual preview
DVD-P145
Brand: Samsung Pages: 16
Samsung DVD-HD950 Owner'S Manual preview
DVD-HD950
Brand: Samsung Pages: 75
Samsung DVD-HD950 User Manual preview
DVD-HD950
Brand: Samsung Pages: 75
Samsung DVD-HD850 User Manual preview
DVD-HD850
Brand: Samsung Pages: 64
Samsung DVD-HD746 Manual preview
DVD-HD746
Brand: Samsung Pages: 22

Brands by name

Popular brands

Load more brands