Pioneer DV-588A-S, Operating Instructions Manual

READ INSTRUCTIONS

— All the safety and 

operating instructions should be read before the 
product is operated.

RETAIN INSTRUCTIONS

— The safety and 

operating instructions should be retained for 
future reference.

HEED WARNINGS 

— All warnings on the product 

and in the operating instructions should be 
adhered to.

FOLLOW INSTRUCTIONS 

— All operating and use 

instructions should be followed.

CLEANING

— The product should be cleaned only 

with a polishing cloth or a soft dry cloth. Never 
clean with furniture wax, benzine, insecticides 
or other volatile liquids since they may corrode 
the cabinet.

ATTACHMENTS 

— Do not use attachments not 

recommended by the product manufacturer as 
they may cause hazards.

WATER AND MOISTURE 

— Do not use this 

product near water — for example, near a 
bathtub, wash bowl, kitchen sink, or laundry 
tub; in a wet basement; or near a swimming 
pool; and the like.

ACCESSORIES

— Do not place this product on an 

unstable cart, stand, tripod, bracket, or table. 
The product may fall, causing serious injury to a 
child or adult, and serious damage to the 
product. Use only with a cart, stand, tripod, 
bracket, or table recommended by the 
manufacturer, or sold with the product. Any 
mounting of the product should follow the 
manufacturer’s instructions, and should use a 
mounting accessory recommended by the 
manufacturer.

CART 

— A product and cart combination should be 

moved with care. Quick stops, excessive force, 
and uneven surfaces may cause the product 
and cart combination to overturn.

VENTILATION 

— Slots and openings in the cabinet 

are provided for ventilation and to ensure 
reliable operation of the product and to protect 
it from overheating, and these openings must 
not be blocked or covered. The openings should 
never be blocked by placing the product on a 
bed, sofa, rug, or other similar surface. This 
product should not be placed in a built-in 
installation such as a bookcase or rack unless 
proper ventilation is provided or the 
manufacturer’s instructions have been adhered 
to.

POWER SOURCES 

— This product should be 

operated only from the type of power source 
indicated on the marking label. If you are not 
sure of the type of power supply to your home, 
consult your product dealer or local power 
company.

LOCATION 

– The appliance should be installed in a 

stable location.

NONUSE PERIODS 

– The power cord of the 

appliance should be unplugged from the outlet 
when left un-used for a long period of time.

GROUNDING OR POLARIZATION

•  If this product is equipped with a polarized 

alternating current line plug (a plug having one 
blade wider than the other), it will fit into the 
outlet only one way. This is a safety feature. If 
you are unable to insert the plug fully into the 
outlet, try reversing the plug. If the plug should 
still fail to fit, contact your electrician to replace 
your obsolete outlet. Do not defeat the safety 
purpose of the polarized plug.

•  If this product is equipped with a three-wire 

grounding type plug, a plug having a third 
(grounding) pin, it will only fit into a grounding 
type power outlet. This is a safety feature. If you 
are unable to insert the plug into the outlet, 
contact your electrician to replace your obsolete 
outlet. Do not defeat the safety purpose of the 
grounding type plug.

POWER-CORD PROTECTION 

— Power-supply 

cords should be routed so that they are not likely 
to be walked on or pinched by items placed 
upon or against them, paying particular 
attention to cords at plugs, convenience 
receptacles, and the point where they exit from 
the product.

OUTDOOR ANTENNA GROUNDING 

— If an 

outside antenna or cable system is connected to 
the product, be sure the antenna or cable 
system is grounded so as to provide some 
protection against voltage surges and built-up 
static charges. Article 810 of the National 
Electrical Code, ANSI/NFPA 70, provides 
information with regard to proper grounding of 
the mast and supporting structure, grounding of 
the lead-in wire to an antenna discharge unit, 
size of grounding conductors, location of 
antenna-discharge unit, connection to 
grounding electrodes, and requirements for the 
grounding electrode. See Figure A.

LIGHTNING

— For added protection for this 

product during a lightning storm, or when it is 
left unattended and unused for long periods of 
time, unplug it from the wall outlet and 
disconnect the antenna or cable system. This 
will prevent damage to the product due to 
lightning and power-line surges.

POWER LINES 

— An outside antenna system 

should not be located in the vicinity of overhead 
power lines or other electric light or power 
circuits, or where it can fall into such power 
lines or circuits. When installing an outside 
antenna system, extreme care should be taken 
to keep from touching such power lines or 
circuits as contact with them might be fatal.

OVERLOADING

— Do not overload wall outlets, 

extension cords, or integral convenience 
receptacles as this can result in a risk of fire or 
electric shock.

OBJECT AND LIQUID ENTRY 

— Never push 

objects of any kind into this product through 
openings as they may touch dangerous voltage 
points or short-out parts that could result in a 
fire or electric shock. Never spill liquid of any 
kind on the product.

SERVICING 

— Do not attempt to service this 

product yourself as opening or removing covers 
may expose you to dangerous voltage or other 
hazards. Refer all servicing to qualified service 
personnel.

DAMAGE REQUIRING SERVICE 

— Unplug this 

product from the wall outlet and refer servicing 
to qualified service personnel under the 
following conditions:

•  When the power-supply cord or plug is 

damaged.

•  If liquid has been spilled, or objects have fallen 

into the product.

•  If the product has been exposed to rain or water.
•  If the product does not operate normally by 

following the operating instructions. Adjust only 
those controls that are covered by the operating 
instructions as an improper adjustment of other 
controls may result in damage and will often 
require extensive work by a qualified technician 
to restore the product to its normal operation.

•  If the product has been dropped or damaged in 

any way.

•  When the product exhibits a distinct change in 

performance — this indicates a need for service.

REPLACEMENT PARTS 

— When replacement parts 

are required, be sure the service technician has 
used replacement parts specified by the 
manufacturer or have the same characteristics 
as the original part. Unauthorized substitutions 
may result in fire, electric shock, or other 
hazards.

SAFETY CHECK 

— Upon completion of any service 

or repairs to this product, ask the service 
technician to perform safety checks to 
determine that the product is in proper 
operating condition.

WALL OR CEILING MOUNTING 

— The product 

should not be mounted to a wall or ceiling.

HEAT 

— The product should be situated away from 

heat sources such as radiators, heat registers, 
stoves, or other products (including amplifiers) 
that produce heat.

GROUND
CLAMP

ELECTRIC
SERVICE
EQUIPMENT

ANTENNA
LEAD IN 
WIRE

ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)

GROUNDING CONDUCTORS
(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)

NEC — NATIONAL ELECTRICAL CODE

Fig. A

D1-4-2-2_En

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la Classe B est conforme à la norme NMB-003 du Canada. 

D8-10-1-3_EF

CAUTION:

This product satisfies FCC regulations when shielded cables and connectors are used to connect the 

unit to other equipment. To prevent electromagnetic interference with electric appliances such as radios and 
televisions, use shielded cables and connectors for connections. 

D8-10-3a_En

DV588A KU_Mid.book Page 3 Monday, April 18, 2005 8:54 PM

Downloaded From Disc-Player.com Pioneer Manuals