background image

 

Before you start

01

 

8

 

En

 

What’s in the box

 

Please confirm that the following accessories 
are in the box when you open it.

• Remote control

• AA/R6P dry cell batteries x2

• Stereo audio cable (red/white plugs)

• Video cable (yellow plugs)

• 4-pin S400 i.LINK cable 

 

(DV-868AVi only)

 

• Power cable

• These operating instructions

• Warranty card

 

Putting the batteries in the 
remote control

 

1

Open the battery compartment cover 

on the back of the remote control.

2

Insert two AA/R6P batteries into the 

battery compartment following the 
indications (

 

 

 

 

) inside the 

compartment.

3

Close the cover.

 

Incorrect use of batteries can result in 
hazards such as leakage and bursting. 
Please observe the following:

• Don’t mix new and old batteries together.

• Don’t use different kinds of battery 

together—although they may look similar, 
different batteries may have different 
voltages.

• Make sure that the plus and minus ends 

of each battery match the indications in 
the battery compartment.

• Remove batteries from equipment that 

isn’t going to be used for a month or 
more.

• When disposing of used batteries, please 

comply with governmental regulations or 
environmental public instruction’s rules 
that apply in your country or area.

 

H048 En

 

Using the remote control

 

Keep in mind the following when using the 
remote control:

• Make sure that there are no obstacles 

between the remote and the remote 
sensor on the unit.

• The remote has a range of about 7 meters.

• Remote operation may become unreliable 

if strong sunlight or fluorescent light is 
shining on the unit’s remote sensor.

• Remote controllers for different devices 

can interfere with each other. Avoid using 
remotes for other equipment located 
close to this unit.

• Replace the batteries when you notice a 

fall off in the operating range of the 
remote.

868en.book.fm 8 ページ 2003年8月19日 火曜日 午前9時30分

Summary of Contents for DV-668AV



































































































Reviews: