14
To view playback of a recorded tape or DVD disc, or to
watch a program selected by the VCR's channel
selector, the TV must be set to channel 3 or 4 (video
channel).
Setting the video channel
When a TV is connected with the 75 ohm coaxial cable only.
1
Press and hold
3
or
4
on the
remote control for 3 seconds
in the standby mode to select
CH 3 or 4. The selected chan-
nel number will flash on the display for about 4 seconds.
2
Turn ON the TV and set to CH 3 or 4 to correspond with
the channel selected in step
1
.
3
Press
STANDBY/ON
to turn on the DVD/VCR.
4
Press
DVD/VCR
to select the VCR mode. The VCR
indicator on the front panel will light.
5
Press
TV/VCR
to select the VCR position.
The VCR indicator will appear in the display.
6
Select any channel to receive a TV station in your area.
The channel number will appear on the screen for about
4 seconds.
For a push-button TV tuner
If CH 3 or 4 corresponding to the video channel cannot be
tuned on your TV, proceed as follows: set the VCR 3/4
channel selector and the TV to CH 3 or 4, play back a
prerecorded tape and tune the TV to receive a sharp color
picture from the video cassette recorder. Refer to your TV
owner's manual for details.
NOTES:
•
When shipped from factory, the video channel is set to
CH 3.
•
If the unit does not operate properly, or No key opera-
tion (by the unit and/or the remote control):
Static elec-
tricity, etc., may affect the player's operation. Disconnect the
AC power cord once, then connect it again.
NOTES:
• Both the VCR and the DVD have their own menu option
(See page 23).
• If no buttons are pressed for more than 60 seconds, the
MENU screen will return to normal TV-operation automati-
cally.
You can choose from three different languages
(English, French and Spanish) for the on-screen displays.
Setting the language
〈
+/-/ENTER/MENU
〉
MENU
TIMER REC SET
AUTO REPEAT
ON
OFF
ON
OFF
SAP
CH SETUP
SYSTEM SETUP
〈
+/-/ENTER/MENU
〉
SYSTEM SETUP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
AUTO CLOCK
STANDARD TIME
DAYLIGHT SAVING TIME
ON
OFF
ON
OFF
1
Press
VCR MENU
.
The VCR menu screen
will appear. Press
SET +
or
–
to select the “SYS-
TEM SETUP” menu, then
press
ENTER
.
If you use the unit for the
first time and press
VCR
MENU
, instead of the main menu screen on the right the
“SYSTEM SETUP” menu screen in step
2
may appear.
2
Press
SET +
or
–
to select
the “LANGUAGE” option,
then press
ENTER
.
3
Press
SET +
or
–
to select
the desired language: En-
glish (ENGLISH), Spanish
(ESPAÑOL) or French
(FRANCAIS), then press
ENTER
.
4
Press
VCR MENU
until the MENU screen is cleared.
Setting up the VCR section
VRB1362A_10-17.pm6
7/10/04, 16:07
14
