DVR-220-S
86
1
2
3
4
1
2
3
4
C
D
F
A
B
E
Table 2: Key operations in Specific Channel Setting mode
(effective only during recording/playback stop)
Key
Operation
Setting (
∗
: Default)
Remarks
DIG/ANA
Switches cyclically between General
Setting mode and Specific Channel
Setting mode.
–
–
INPUT SELECT,
C/–
(
∗
R)
Switches inputs or channels.
–
–
[SIDE A], [SIDE B]
Sets Sync AGC.
ON (
∗
) / OFF
–
[SPEED +], [SPEED -] HD Err Det
Normal (
∗
) / Fast / Stop
–
[Rev SCAN],
[SCAN Fwd]
Sets V-Sync Det.
Normal (
∗
) / Short / Long
–
[Rev STILL STEP],
[STILL STEP Fwd]
Sets Std Det.
Normal (
∗
) / Non STD
–
–
–
–
[Rev
×
3], [
×
3 Fwd]
Sets Threshold level.
(
∗
) Normal
Auto Threshold Level
Manual Threshold Level
Pedestal Level
–
[Rev CHAPTER SKIP]
[CHAPTER SKIP Fwd]
Sets Threshold level.
According to the setting of Threshold,
the values can be changed within the
range mentioned below.
–
• Normal:
The value is fixed, with no display of
the value.
–
• Auto Threshold Level:
0-8 (Default: 0)
• Manual Threshold Level:
0-8 (Default: 0)
• Pedestal Level:
0-8 (Default: 0)
CLEAR
Initializes the setting of Specific
Channel Setting mode.
–
Pressing the key resets the settings
of Specific Channel Setting mode
for that channel to the initial values.
Settings of General Setting mode
are not affected.
PAUSE
The specific-setting data for the
currently selected channel are reset
to their default values.
(But the assignment of a channel
having specific settings is not
canceled.)
–
Settings of General Setting mode
are not affected (retained).
ESC
Exits AVIO setting for specific areas,
clearing the OSD.
–
–
∗
R: Refers to keys on the remote control unit supplied with this unit. The keys without "R" refer to the remote control unit for service.
PLAY
All channels assigned to have specific
settings are canceled, and the
specific settings are reset to their
default values.
–
Settings of General Setting mode
are not affected.
