Recording
06
52
En
Moving the end time by 30-minute blocks
1
During timer recording, press and hold
REC for
three seconds.
The timer indicator disappears from the front panel
display.
2
Press
REC repeatedly to extend recording in 30
minute increments.
Programming a new end time
Note that it is only possible to program a new end time for
a timer recording when VPS/PDC is off.
1
During timer recording, press TIMER REC to
display the Timer Recording screen.
You can also access the Timer Recording screen from
the Home Menu (press
HOME MENU
, select
Timer
Recording
, then
Timer Recording (View)
).
2
Use the
(cursor up) button to highlight the
current timer recording (‘Recording’ is shown in the
‘VPS/PDC’ column), then press ENTER.
A screen showing details of the timer recording appears.
From this screen, only the recording stop time can be
changed.
3
Set a new Stop time for the timer recording.
Use the
/
(cursor left/right) buttons to select the
hour or minute field, then use the
/
(cursor up/down)
buttons to change the time.
4
Press ENTER to set the new time and exit the
screen.
Recording will continue until the new stop time is
reached.
Canceling and stopping a timer recording in
progress
After a timer recording has started, you can cancel the
program (but continue recording), or stop recording
completely if you need to.
1
During timer recording, press and hold
REC for
three seconds.
Only the program is canceled (the timer indicator
disappears); recording continues so that you can
manually stop recording whenever you like.
2
When you want to stop recording completely,
press
STOP REC.
Preventing use of the recorder before a
timer recording (child lock)
You can make all the front panel and remote control
buttons inoperative using the child lock feature. This is
useful when you set a timer recording and want to make
sure that the timer settings are not changed before
recording has finished.
1
If the recorder is on, switch it into standby.
2
Press and hold
STOP on the front panel for
three seconds to lock the controls.
The front panel display briefly shows
LOCK
. If any buttons
are pressed on the remote or front panel,
LOCK
is briefly
displayed again.
• To unlock the recorder, press and hold
STOP
on
the front panel for three seconds until the display
shows
UNLOCK
.
• To cancel a timer recording when the recorder is
locked, first unlock the recorder (see above), then
press and hold
REC
for three seconds.
New Input
WED 13/12 7:00 8:00 Pr 3 SP Recording
Date Start Stop CH Mode VPS/PDC
Timer Recording
DVD Remain
1h20m (SP)
1/1
VPS/PDC
Date Start Stop CH Rec Mode
TUE 12/12 10 00 11 00 Pr 7 SP
OFF
Timer Recording
Program Set
Ttl Name Input
REC
STOP REC
DVR-04_UK.book 52 ページ ２００４年４月１１日 日曜日 午後５時２０分
