The Initial Setup menu
14
110
En
Chapter 14
The Initial Setup menu
Using the Initial Setup menu
The Initial Setup menu is where you can set various recorder options for sound, picture,
language and so on.
Some settings can only be changed when the recorder is stopped. During playback and
recording these settings are grayed out in the Initial Setup menu.
Except for the Setup Navigator, menu screens are exited automatically after 20 minutes of
inactivity.
•
Press HOME MENU and select ‘Initial Setup’.
In the table below, the default option is marked with a •.
Setting
Options
Explanation
Basic
Clock Setting
Auto
Set the channel that broadcasts a clock signal and
the clock will be set automatically.
Manual •
If there is no channel that broadcasts a clock signal
in your area, you can set the time and date manually.
Display
Set preferences for time and date display format.
The clock must be set in order to use timer recording.
Input Line System
525 System
Use for NTSC or PAL-60 recording from an external
input.
625 System •
Use for standard PAL or SECAM recording.
See also About the input line system on page 119 for more information on this setting.
Power Save
On
No antenna input signals are passed through to the
outputs when the recorder is in standby.
Off •
When the recorder is in standby, all signals arriving
at the antenna inputs are passed along to the
outputs.
DVR640H_RLT_EN.book 110 ページ ２００６年４月１１日 火曜日 午後１２時２６分
