The Initial Setup menu
14
111
En
HELP Setting
On •
Switches on the automatic Help screens for GUI dis-
plays.
Off
Switches off the automatic Help screens for GUI dis-
plays. (Press
HELP
on the remote to manually display
the Help screen.)
Setup Navigator
Start
Select to start the Setup Navigator. See also
Switch-
ing on and setting up
on page 28
.
Tuner
Auto Channel
Setting
Next Screen
Proceed to the next screen, select your country, then
wait for automatic tuning to complete. The channel
mapping screen should appear when the recorder is
set up. Press
ENTER
to exit this screen.
Manual CH Setting
Next Screen
Proceed to the next screen if you need to adjust any
of the settings made by auto tuning. Select your
country, then proceed to the manual channel setting
screen:
• Change channel presets using the
PREV
/
NEXT
buttons.
• To skip the displayed channel (because there is no
station assigned to that channel), change the
Skip
setting to
On
.
• Set the
CH SYSTEM
setting to match the channel
system of your country or region.
• Set the
CHANNEL
setting to the channel you want
to assign to the current channel preset.
• To manually fine tune the channel, change the
AFT
setting to
Off
then adjust the
Level
setting.
•
Set the
Sound System
setting to match the
sound system of your region.
• The
Name
field allows you to input a name of up to
five characters for the current channel preset.
Channel Swapping
Next Screen
Proceed to the next screen to swap channel
assignments of different presets so that you can
group together presets that naturally go together.
Select two presets to swap then press
ENTER
.
Setting
Options
Explanation
DVR640H_RLT_EN.book 111 ページ ２００６年４月１１日 火曜日 午後１２時２６分
