background image

 

The Initial Setup menu

14

 

117

 

En

 

Auto Chapter 
(Video)

No Separation

 

Automatic chapter marking is switched off.

 

10 minutes •

 

When recording in Video mode, chapter markers are 
inserted every 10 minutes.

 

15 minutes

 

Chapter markers are inserted every 15 minutes.

 

This settings applies to recording or real-time copying to Video mode DVD-R/-RW discs.

 

Auto Chapter 
(DVD+R/+RW)

No Separation

 

Automatic chapter marking is switched off.

 

10 minutes •

 

When recording in Video mode, chapter markers are 
inserted every 10 minutes.

 

15 minutes

 

Chapter markers are inserted every 15 minutes.

 

DVD-RW Auto Init.

VR Mode •

 

Blank DVD-RW discs are initialized for VR mode 
recording when loaded into the recorder for the first 
time.

 

Video Mode

 

Blank DVD-RW discs are initialized for Video mode 
recording.

 

HDD Recording 
Format

Video Mode Off

 

Recordings made to the HDD are made in VR mode. 
Use this setting if you don’t need to transfer the 
recording later to a Video mode DVD.

 

Video Mode On •

 

Recordings made to the HDD are compatible with 
Video mode recordings. This setting is convenient if 
you want to transfer the recording to a Video mode 
DVD as high-speed copy can be used.

 

When Video Mode On is used, you must select the audio channel you want to record when recording a bilingual 
broadcast. On the Video Mode Off setting, both channels will be recorded and you can switch between them on 
playback. See also Bilingual Recording on page 113.

 

Playback

TV Screen Size

4:3 (Letter Box) •

 

Select if you have a standard 4:3 TV and prefer the let-
ter box format presentation for widescreen material.

 

4:3 (Pan & Scan)

 

Select if you have a standard 4:3 TV and prefer the 
pan and scan presentation for widescreen material.

 

16:9

 

Select if you have a widescreen 16:9 TV. Your TV set-
tings determine how 4:3 material will look.

 

Selecting 

 

4:3 (Letter Box)

 

 or 

 

4:3 (Pan & Scan)

 

 does not guarantee that all video material will be presented in that 

format as some discs override this setting.

 

Setting

Options

Explanation

DVR640H_RLT_EN.book 117 ページ 2006年4月11日 火曜日 午後12時26分

Summary of Contents for DVR-310













































































































































Reviews: