Pioneer DVR-530H-S Operating Instructions Manual Download

Page: 101 / 128

The Initial Setup menu

101

Tuner Settings

Auto Channel Setting

Auto Scan

Select your country and then wait for the recorder to auto tune into
channels in your area. After auto scan has finished, the channel map-
ping screen appears showing which channels have been assigned to
which program numbers. You can skip unwanted channels using the
Manual Channel Setting option below.
Press

HOME MENU

to exit the channel mapping screen.

Download from TV

If your TV supports this feature you can download all the channels that
your TV is tuned to via the SCART input. Select your country and then
wait for the download to complete. After the download is complete, the
channel mapping screen appears, as above.
See also the operating instructions that came with your TV for more
information.

Manual CH Setting

Next Screen

Proceed to the next screen if you need to adjust any of the settings
made by auto tuning. Select your country, then proceed to the manual
channel setting screen:
• Change channel presets using the

CH +/–

buttons.

• To skip the displayed channel (because there is no station assigned
to that channel), change the

Skip

setting to

• Set the

CH SYSTEM

setting to match the channel system of your

country or region.
• Set the

CHANNEL

setting to the channel you want to assign to the

current channel preset.
• To manually fine tune the channel, change the

AFT

setting to

Off

then adjust the

Level

setting.

• The

Name

field allows you to input a name of up to five characters

for the current channel preset.
• If the currently selected channel is scrambled requiring a decoder
connected to the

AV2 (INPUT 1/DECODER)

, set the

Decoder

setting

Channel Swapping

Next Screen

Proceed to the next screen to swap channel assignments of different
presets so that you can group together presets that naturally go
together. Select two presets to swap then press

ENTER

Video In/Out Settings

Input Colour System

Next Screen

Proceed to the next screen to set the input colour system for each
channel preset. Use the

CH +/–

buttons to change the preset. On the

default

Auto

setting the recorder can generally correctly detect

whether the input signal is PAL, SECAM, 3.58 NTSC or PAL-60, but in
some cases you may have to set it manually if the picture is displayed
incorrectly.

See also About the input colour system on page 107 for more information on this setting.

Component Video Out

Interlace •

Select if your monitor/TV is not compatible with progressive-scan
video.

Progressive

Select if your monitor/TV is progressive-scan compatible. Check the
operating instructions that came with your monitor/TV if you’re not
sure.

For Component Video Out to be effective, the AV1 Out setting (see page 102) must be set to something other than

RGB

Setting

Options

Explanation

13 Initial_Settings.fm 101 ページ２００５年２月１４日　月曜日　午後７時９分