background image

 

Using the GUIDE Plus+™ electronic program guide

05

 

39

 

En

 

Navigating GUIDE Plus+

 

The table below shows a summary of the remote buttons 
you’ll use to navigate the GUIDE Plus+ system.

 

One-Button-Record

 

The 

 

RED

 

 Action button (Record) is visible anytime you 

can highlight a program title, including from the Grid, 
after a search, or in your recommendations in the My TV 
area.

The program name, date, channel, recording start and 
end times are all set automatically when you set a timer 
recording using One-Button-Record. You can edit the 
settings if you want to anytime before the recording is 
due to start (see 

 

Editing a scheduled recording

 

 on 

page 43).

 

1

Use the 

 

///

 

 buttons to highlight a 

program title.

2

Press the RED Action button (Record).

 

The program is now set for recording. When the program 
is due to start, the recorder will switch to the correct 

channel and start recording

 

1

 

.

• You can review the shows you have set to record in 

the Schedule Area (see also 

 

The Schedule Area

 

 on 

page 43).

 

Key

What it does

 

GUIDE

 

Press to access GUIDE Plus+ (also 
use to exit GUIDE Plus+).

 

///

 

Use to navigate screens (highlight an 
item).

 

RED

 

 

GREEN

 

 

YELLOW

 

 

BLUE

 

Action buttons that change 
functionality depending on the Area.

 

MENU

 

Press to jump directly to the Menu bar.

 

TIMER REC

 

Press to go directly to the Schedule 
area.

 

INFO

 

Press to display extended information 
for the current program.

DVD RECORDER

MENU

GUIDE

INFO

ENTER

PREV

NEXT

STEP/SLOW

TIMER REC

 

 

ENTER

 

Press to confirm a selection or to leave 
the GUIDE Plus+ screen.

 

Number buttons

 

Use for numeric entry.

 

 

 / 

 

 

Press to select the previous/next page 
of information (in the grid, for 
example).

 

 

 / 

 

 

 

Press to select the previous/next day.

Note

 

1 Please note that recording times set using the GUIDE Plus+ system do not automatically change to reflect any changes that may occur in 

the program broadcast schedules.

 

Key

What it does

DVR-530H_EU.book 39 ページ 2005年2月14日 月曜日 午後2時20分

Summary of Contents for DVR-530H-S

































































































































Reviews: