background image

CAUTION

–  PREVENT ELECTRIC SHOCK DO 

NOT USE THIS (POLARIZED) PLUG 
WITH AN EXTENSION CORD. 

 

  RECEPTACLE OR OTHER OUTLET 

UNLESS THE BLADES CAN BE 
FULLY INSERTED TO PREVENT 
BLADE EXPOSURE.

ATTENTION

– POUR PREVENIR LES CHOCS 

ELECTRIQUES NE PAS UTILISER 
CETTE FICHE POLARISEE AVEC UN 
PROLONGATEUR UNE PRISE DE 
COURANT OU UNE AUTRE SORTIE 
DE COURANT, SAUF SI LES LAMES 
PEUVENT ETRE INSEREES A FOND 
SANS EN LAISSER AUCUNE PARTIE 
A DECOUVVERT.

D2-4-4-1_EF

NOTE TO CATV SYSTEM INSTALLER

THIS REMINDER IS PROVIDED TO CALL THE CATV 
SYSTEM INSTALLER’S ATTENTION TO ARTICLE 820-
40 OF THE NEC THAT PROVIDES GUIDELINES FOR 
PROPER GROUNDING AND, IN PARTICULAR, 
SPECIFIES THAT THE CABLE GROUND SHALL BE 
CONNECTED TO THE GROUNDING SYSTEM OF THE 
BUILDING, AS CLOSE TO THE POINT OF CABLE 
ENTRY AS PRACTICAL. 

D1-4-2-8_En

Recording equipment and copyright:

 You may use 

this product only to reproduce or copy materials for 
which you own the copyright or have obtained 
permission to copy from the copyright owner or for 
which you otherwise have a legal right to reproduce 
or copy. Unless you own the copyright or have 
obtained permission from the copyright owner or 
otherwise have a legal right to reproduce or copy, 
you may be violating the law, including copyright 
law, and may be subject to payment of damages and 
other remedies.  

K018US_En

POWER-CORD CAUTION

Handle the power cord by the plug. Do not pull out the 
plug by tugging the cord and never touch the power 
cord when your hands are wet as this could cause a 
short circuit or electric shock. Do not place the unit, a 
piece of furniture, etc., on the power cord, or pinch the 
cord. Never make a knot in the cord or tie it with other 
cords. The power cords should be routed such that they 
are not likely to be stepped on. A damaged power cord 
can cause a fire or give you an electrical shock. Check 
the power cord once in a while. When you find it 
damaged, ask your nearest PIONEER authorized 
service center or your dealer for a replacement.

S002_En

This product is for general household purposes. Any 
failure due to use for other than household purposes 
(such as long-term use for business purposes in a 
restaurant or use in a car or ship) and which 
requires repair will be charged for even during the 
warranty period. 

K041_En

This product includes FontAvenue

®

 fonts licenced by

NEC corporation. FontAvenue is a registered trademark

of NEC Corporation.

DANGER

VISIBLE AND INVISIBLE LASER RADIATION
WHEN OPEN. AVOID DIRECT EXPOSURE TO
BEAM.

This product incorporates copyright protection
technology that is protected by method claims of
certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and other
rights owners. Use of this copyright protection
technology must be authorized by Macrovision
Corporation, and is intended for home and other limited
viewing uses only unless otherwise authorized by
Macrovision Corporation. Reverse engineering or
disassembly is prohibited.

WARNING:

 Handling the cord on this product or 

cords associated with accessories sold with the 
product will expose you to lead, a chemical known to 
the State of California and other governmental 
entities to cause cancer and birth defects or other 
reproductive harm.

D36-P4_En

Wash hands after handling

This product contains mercury. Disposal of this 
material may be regulated due to environmental 
considerations. For disposal or recycling 
information, please contact your local authorities or 
the Electronics Industries Alliance : www.eiae.org.

K057_En

DVR-530H_KU.book 4 ページ 2005年6月8日 水曜日 午前11時16分

Summary of Contents for DVR-531H-S





















































































































Reviews: