The Initial Setup menu
113
En
15
Chapter 15
The Initial Setup menu
Using the Initial Setup menu
The Initial Setup menu is where you can set various recorder options for sound, picture,
language and so on.
Some settings can only be changed when the recorder is stopped. During playback and
recording these settings are grayed out in the Initial Setup menu.
Except for the Setup Navigator, menu screens are exited automatically after 20 minutes of
inactivity.
•
Press HOME MENU and select ‘Initial Setup’.
In the table below, the default option is marked with a •.
Setting
Options
Explanation
Basic
Clock Setting
Auto
Set the channel that broadcasts a clock signal and
the clock will be set automatically.
Manual •
If there is no channel that broadcasts a clock signal
in your area, you can set the time and date manually.
The clock must be set in order to use timer recording.
Input Line System
525 System
Use for NTSC or PAL-60 recording from an external
input.
625 System •
Use for standard PAL or SECAM recording.
See also About the input line system on page 124 for more information on this setting.
Power Save
Mode 1
Only signals arriving at the antenna input are passed
through to the antenna output when the recorder is
in standby.
Mode 2
No input signals are passed through to the outputs
when the recorder is in standby.
Off •
When the recorder is in standby, all signals arriving
at the SCART and antenna inputs are passed along
to the outputs.
HELP Setting
On •
Switches on the automatic Help screens for GUI
displays.
Off
Switches off the automatic Help screens for GUI
displays. (Press
HELP
on the remote to manually
display the Help screen.)
Setup Navigator
Start
Select to start the Setup Navigator. See also
Switching on and setting up
on page 28
.
DVR550HK_YXVSN5_EN.book 113 ページ ２００７年４月５日 木曜日 午後６時５１分
