25
English
En
1
Turn off the power supply of the personal computer, and remove the cover or the
front panel.
2
Remove the blank panel installed on the front of the 5.25 inch slot.
3
Install the fixing slide rails on the drive. (When slide rails are required, please contact
your shop or the computer manufacturer.)
4
Insert the drive into the slot.
5
When fixing is required, please refer to the instruction manual for the computer.
÷
Please use screws with a length of 5 mm (3/16 in.) or less for mounting. Using
longer screws may cause damage on the drive.
÷
When the mounting screws are loose etc., the vibrations from disc rotation may
generate ripping noise, to prevent it the screws should be tightened securely.
INSTALLATION
REA
D/W
RITE
DIS
C
PHO
NES