DVR-RT500-S
104
1
2
3
4
1
2
3
4
C
D
F
A
B
E
2-14: CAPSTAN DD UNIT (Refer to Fig. 2-14)
1. Remove the Capstan Belt.
2. Remove the screw
1
.
3. Remove the Capstan Holder.
4. Remove the 3 screws
2
.
5. Remove the Capstan DD Unit.
2-15: MAIN CAM/PINCH ROLLER CAM/JOINT
GEAR (Refer to Fig. 2-15-A)
1. Remove the E-Ring
1
, then remove the Main Cam.
2. Remove the E-Ring
2
, then remove the Pinch Roller
Cam and Joint Gear.
NOTE:
1. In case of the Pinch Roller Cam and Main Cam
installation, install them as the circled section of Fig.
2-15-B so that the each markers are met.
(Refer to Fig. 2-15-B)
2-16: LOADING GEAR S/T UNIT
(Refer to Fig. 2-16-A)
1. Remove the E-Ring
1
and remove the Main Loading
Gear.
2. Remove the Main Rod, Tension Lever, Loading Arm S
Unit and Loading Arm T Unit.
NOTE:
1. When you install the Loading Arm S Unit, Loading Arm T
Unit and Main Loading Gear, align each marker.
(Refer to Fig. 2-16-B)
Fig. 2-14
Fig. 2-15-A
Fig. 2-15-B
Fig. 2-16-B
1
1
1
2
2 2
2
Capstan Belt
Pinch Roller Cam
Marker
Marker
Marker
Main Cam
Capstan Holder
Capstan DD Unit
Main Loading Gear
Main Loading Gear
Loading Arm T Unit
Loading Arm T Unit
Loading Arm S Unit
Loading Arm S Unit
Main Rod
Tension Lever
Main Cam
Pinch Roller Cam
Joint Gear
Fig. 2-16-A
Screw Torque: 4
±
0.5kgf•cm
