background image

 

HDD and DVD recording

06

 

51

 

En

 

Recording time and picture quality 

 

There are six preset recording quality modes

 

1

 

:

 

XP

 

 – High quality setting, gives about one hour of 

recording time on a DVD disc.

 

SP

 

 (Standard Play) – Default quality, used for most 

applications, gives about two hours of recording time 
on a DVD.

 

LP

 

 (Long Play) – Lower video quality than SP, but 

doubles the recording time on a DVD to about four 
hours.

 

EP

 

 (Extended Play) – Lower quality than LP, but gives 

about six hours of recording time on a DVD disc.

 

SLP

 

 (Super Long Play) – Lower quality than EP, but 

gives about eight hours of recording time on a DVD 
disc.

 

SEP

 

 (Super Extended Play) – Lowest video quality but 

gives about ten hours of recording time on a DVD 
disc.

Please note that there is a trade-off between recording 
time and quality. The longer the possible recording time, 
the lower the recorded picture quality.

In addition to these settings, when Manual Recording is 
On (see 

 

Manual Recording

 

 on page 113) you can access 

32 different recording quality/time settings (

 

MN1

 

 

MN32

 

), a high-quality audio mode (

 

LPCM

 

), and a super-

high quality (data transfer rate of around 15 Mbps) HDD 
recording mode (

 

XP+

 

).

When setting a timer recording there is a further option, 

 

AUTO

 

, which maximizes the recording quality for the 

space available on the disc loaded at the time of 
recording. (If recording to the HDD, the recording quality 
is maximized to fit on to a DVD disc.)

 

Recorded audio

 

In all except the 

 

LPCM

 

 mode, sound is recorded in two 

channel Dolby Digital format. When set to 

 

LPCM

 

, sound 

is recorded in high quality, uncompressed Linear PCM 
format.

If the broadcast audio is bilingual and you are recording 
in Video mode or to the HDD with the HDD Recording 
Format set to Video Mode On, or on the 

 

LPCM

 

 setting, 

use the Bilingual Recording setting (page 111) to select 
the 

 

A/L

 

 or 

 

B/R

 

 audio channel to record before recording 

starts. In other cases, both channels of a bilingual 
broadcast will be recorded and you can switch on 
playback.

 

Restrictions on video recording

 

You cannot record copy-protected video using this 
recorder. Copy-protected video includes DVD-Video discs 
and some satellite broadcasts. If copy-protected material 
is encountered during a recording, recording will pause 
automatically and an error message will be displayed on-
screen.

Video that is ‘copy-once only’ can only be recorded on the 
HDD or in VR mode (see below).

When recording a TV broadcast or through an external 
input, you can display copy control information on 
screen. (see 

 

Displaying disc information on-screen

 

 on 

page 36). 

 

CPRM

 

CPRM is a copy protection/scrambling system developed 
for the recording of ‘copy once’ broadcast programs. 
CPRM stands for 

 

Content Protection for Recordable 

Media

 

.

This recorder is CPRM compatible, which means that 
you can record copy-once broadcast programs, but you 
cannot then make a copy of those recordings. CPRM 
recordings can only be made on CPRM-compatible 
DVD-R (ver. 2.0/8x or higher) or DVD-RW (ver. 1.1 or 
higher) discs formatted in VR mode or on the HDD.

DVD CPRM recordings can only be played on players that 
are specifically compatible with CPRM.

 

Recording equipment and copyright

 

Recording equipment should be used only for lawful 
copying and you are advised to check carefully what is 
lawful copying in the country in which you are making a 
copy. Copying of copyright material such as films or 
music is unlawful unless permitted by a legal exception 
or consented to by the rightowners.

• This product incorporates copyright protection 

technology that is protected by method claims of 
certain U.S. patents and other intellectual property 
rights owned by Macrovision Corporation and other 
rights owners. Use of this copyright protection 
technology must be authorized by Macrovision 
Corporation, and is intended for home and other 
limited viewing uses only unless otherwise 
authorized by Macrovision Corporation. Reverse 
engineering or disassembly is prohibited.

Note

 

1.All recording times (both in this manual and those shown by the recorder) are approximate. This is because of the way that the video is re-

corded; you may get slightly more or slightly less, depending on what you’re recording.

DVRRT601HS_WV_EN.book 51 ページ 2005年8月3日 水曜日 午後3時31分

Downloaded From DvDPlayer-Manual.com Pioneer Manuals

53

 

En

 

• While the recorder is stopped, you can also use the 

number buttons on the remote to select the channel. 
(For channel 6, press 

 

6

 

 then 

 

ENTER

 

; for channel 24, 

press 

 

2, 4

 

 then 

 

ENTER

 

)

• If the recorder is stopped, you can also use the 

 

+/–

 

 

buttons on the front panel to select the channel 
number.

 

3

Use the REC MODE button to set the picture 

quality/recording time.

 

• See 

 

Setting the picture quality/recording time

 

 above 

for detailed instructions.

 

4

Use the AUDIO button to select the audio 

channel to record.

 

See 

 

Changing audio channels

 

 on page 32 for more on 

this.

• When recording in VR mode, if a broadcast is 

bilingual, both audio channels are recorded, allowing 
you to switch the audio channel on playback. The 
only exception to this is when the picture quality is set 
to 

 

LPCM

 

, in which case you do need to select the 

audio channel before recording.

 

5

Press 

 

 

 REC to start recording.

 

If you want to set a recording end time, press the 

 

 

 REC

 

 

button repeatedly. The recording time increases in 30 
minute increments, up to a maximum of six hours. The 
time the recording will end is shown on-screen and in the 
front panel display. When the recording ends, the 
recorder automatically switches into standby if no other 
operation is being performed.

• To cancel the set recording time, press 

 

 

 REC

 

.

• If you want to pause recording at any time, press 

 

 

 PAUSE

 

. Press again to restart the recording. (If 

recording to the HDD or in VR mode, a new chapter 
is started after recording restarts)

 

6

To stop the recording, press 

 

 

 STOP REC.

 

• If you set the recording time in the previous step, you 

can still stop the recording anytime by pressing 

 

 

 

STOP REC

 

.

• Recording will stop automatically when there is no 

more space on the HDD/DVD, or after 12 hours of 
HDD recording (whichever is sooner).

If VPS/PDC is active for two timer programs that are 
programmed to start at the same time, then the 
program that actually starts first takes priority.

 

 Tip

 

• During recording you can turn on/off the SCART loop 

through function. During recording, press the front 
panel 

 

+

 

 button to switch to 

 

SCART THRU

 

 (loop 

through on), or 

 

 

 to switch to 

 

SCART NORM

 

 (loop 

though off). Note that you can’t switch loop through 
on if recording from the 

 

AV2/(INPUT 1/DECODER)

 

 

or 

 

AV1(RGB)-TV

 

 connectors. Also, loop through is 

automatically reset to off after recording has 
finished.

 

Direct recording from TV

 

If you connected this recorder to your TV using a SCART 
cable, and your TV supports Direct Recording, you can 
record whatever is currently being shown on the TV 
without having to worry about what channel preset the 
recorder is on. Check the instructions that came with 
your TV if you’re not sure whether your TV supports this 
feature.

 

1

If necessary, load a recordable disc.

2

Set the picture quality/recording time using the 

REC MODE button.

3

Press TV DIRECT REC to start recording.

 

If you want to set a recording time, press the 

 

 

 REC

 

 

button repeatedly. The recording time increases in 30 
minute increments, up to a maximum of six hours. You 
can see the recording time on-screen and in the front 
panel display. When the recording ends, the recorder 
automatically switches into standby if no other operation 
is being performed.

• To cancel the set recording time, press 

 

 

 REC

 

.

• If you want to pause recording at any time, press 

 

 

 PAUSE

 

. Press again to restart the recording. (If 

recording to the HDD or in VR mode, a new chapter 
is started after recording restarts)

 

4

To stop the recording, press 

 

 

 STOP REC.

 

• If you set the recording time in step 

 

3

 

, you can still 

stop the recording anytime by pressing 

 

 

 STOP REC

 

.

• Recording will stop automatically when there is no 

more space on the HDD/DVD, or after 12 hours of 
HDD recording (whichever is sooner).

REC

STOP REC

REC MODE

TV DIRECT

REC

PAUSE

DVRRT601HS_WV_EN.book 53 ページ 2005年8月3日 水曜日 午後3時31分

Downloaded From DvDPlayer-Manual.com Pioneer Manuals

55

 

En

 

Easy Timer Recording

 

As the name suggests, Easy Timer Recording makes 

setting up a timer recording as simple as possible.

 

1

 

1

Press HOME MENU and select ‘Easy Timer’.

2

Set the TV channel and recording quality.

 

• Use the 

 

CH +/–

 

 buttons to set the channel you want 

to record.

• Use the 

 

REC MODE

 

 button to set the recording 

quality. Press repeatedly to switch between 

 

XP

 

 

SP

 

 

LP

 

 

EP

 

 

SLP

 

 

SEP

 

 and 

 

AUTO

 

 (and 

 

MN

 

 if manual 

recording mode is on).

 

DVD recording: 

 

The 

 

AUTO

 

 option automatically sets 

the best recording quality for the space available on 
the disc loaded at the time of recording.

 

HDD recording: 

 

The 

 

AUTO

 

 option automatically sets 

the best recording quality that would fit on to a blank 
DVD disc.

• Press 

 

DVD

 

 to record to DVD disc, or 

 

HDD

 

 if you want 

to record to the hard disk drive.

 

3

Use 

 

 to move the cursor to the 

recording start date and time on the grid.

 

• You can move the cursor forward or back an hour at 

a time using the 

 

 

 

 and 

 

 

 buttons.

Each row of the grid is one day (you can set the timer 
recording for up to a month in advance). Each column is 
a 15 minute interval.

The darker area represents time that has already passed 
and can’t therefore be selected. The lighter area is time 
that’s available.

 

4

Press ENTER to set the start time.

 

The start date and time is displayed in the middle of the 
screen.

• You can go back and reset the start time if you need 

to by pressing 

 

RETURN

 

.

Note

 

1.You can’t use VPS/PDC with Easy Timer Recording. Set a scheduled recording using the GUIDE Plus+ system if you want to use VPS/PDC.

CH

FWD SCAN

REC MODE

REV SCAN

ENTER

HOME

MENU

RETURN

DVD

HDD

Current time

Recording start time

DVRRT601HS_WV_EN.book 55 ページ 2005年8月3日 水曜日 午後3時31分

Downloaded From DvDPlayer-Manual.com Pioneer Manuals

57

 

En

 

Timer recording FAQ

 

 Frequently Asked Questions

 

• Even though the timer is set, the recorder doesn’t start 

recording!

 

Check that the disc loaded or HDD is recordable, not 
locked (see 

 

Lock Disc

 

 on page 104), and that there are 

fewer than 99/999 titles already on the DVD/HDD.

 

• The recorder won’t let me enter a timer program! Why 

not?

 

You can’t enter a timer program if the clock isn’t set.

 

• What happens when two or more timer programs 

overlap?

 

Basically, the program with the earlier recording start 
time has priority. However, the recorder will start 
recording the program with the later start time after 
the earlier program is finished. If two programs have 
the same times (but different channels, for example), 
the program set most recently takes priority.

If VPS/PDC is active for two timer programs that are 
programmed to start at the same time, then the 
program that actually starts first takes priority.

 

Simultaneous recording and 
playback

 

 

A feature called Chase Play makes it possible to watch a 
recording in progress (DVD or HDD) from the start of the 
recording (as in, playback is ‘chasing’ the recording). For 
example, perhaps you have to miss the first 30 minutes of 
a movie on TV; you can start recording, then start 
watching the movie, from the beginning, while the 
recorder is still recording 30 minutes ahead of you.

In fact, you’re not just limited to watching the recording 
in progress; you can watch anything else already on the 
DVD or HDD by selecting it from the Disc Navigator 
screen (see 

 

Using the Disc Navigator with recordable 

discs and the HDD

 

 on page 62).

 

 Important

 

• Note that you must use a DVD-RW Ver. 1.1 / 2x or 

Ver. 1.2 disc to be able to use this feature.

• You may not be able to use this feature with a 

DVD-RW disc that was first initialized on another 
recorder.

• Chase playback is not possible using a VR mode 

DVD-R disc.

 

During recording, press 

 

 

 PLAY to start playback 

from the beginning of the current recording

 

1

 

, or 

press DISC NAVIGATOR and select another title to 
play from there.

 

You can use all the usual playback controls, such as 

pause, slow-motion play, scan

 

2

 

 and skip.

• To stop playback, press 

 

 

 STOP

 

 (recording will 

continue).

• To stop recording, press 

 

 

 STOP REC

 

 (playback will 

continue).

• During recording or in timer recording standby, you 

can’t play an HDD title, DVD or Video CD/Super VCD 
disc if the Input Line System setting doesn’t match 
the TV line system of the disc/HDD title (see also 

 

Additional information about the TV system settings

 

 

on page 116). Also, during simultaneous recording 
and playback, if the TV line system of the playback 
track/title changes then playback will automatically 
stop.

VR mode

HDD

Note

 

1.You can’t start playback immediately after recording starts. Simultaneous playback and recording doesn’t work while copying or backing up.
2.When scanning a DVD, no sound is output if the recorder is also recording the DVD (see 

 

Scanning discs

 

 on page 64).

DVRRT601HS_WV_EN.book 57 ページ 2005年8月3日 水曜日 午後3時31分

Downloaded From DvDPlayer-Manual.com Pioneer Manuals

59

 

En

 

Finalizing a disc

 

 

Finalizing ‘fixes’ the recordings in place so that the disc 
can be played on a regular DVD player or computer 

equipped with a suitable DVD-ROM drive.

 

1

 

Note that the disc name will appear in the title menu after 
you finalize a disc. Make sure the disc name is as you 
want it before you finalize the disc as it can’t be changed 
afterwards. If you want to rename the disc, see 

 

Input Disc 

Name

 

 on page 104 before starting the steps below.

 

 Important

 

• Once you’ve finalized a disc recorded in Video mode, 

you can’t edit or record anything else on that disc. 
However, the finalization on a DVD-RW disc maybe 
‘undone’; see 

 

Undo Finalize

 

 on page 105 for how to do 

this.

• A VR mode disc can still be recorded and edited on 

this recorder even after finalizing.

 

1

Load the disc you want to finalize.

 

Make sure that the recorder is stopped before 
proceeding.

 

2

Press HOME MENU and select ‘Disc Setup’.

3

Select ‘Finalize’.

4

Select ‘Finalize’ from the finalize options, then 

‘Next Screen’.

5

For Video mode discs only, select a title menu 

style, then select ‘Yes’ to start finalization or ‘No’ to 
cancel.

 

The menu you select will be the one that appears when 
the ‘top menu’ is selected on any DVD player.

• Discs recorded partially or fully on the Pioneer 

DVR-7000 DVD recorder do not support this feature. 
These discs will have only a text title menu when 
finalized on this recorder.

 

6

The recorder will now start finalizing the disc.

 

During finalization:

• If the finalization process of a DVD-RW disc is going 

to take more than around four minutes, you can 
press 

 

ENTER

 

 to cancel. Around four minutes before 

completion, the option to cancel disappears.

• You can’t cancel the finalization of a VR mode DVD-R 

disc.

• How long finalization takes depends on the type of 

disc, how much is recorded on the disc and the 
number of titles on the disc. A disc recorded in VR 
mode can take up to one hour to finalize. A disc 
recorded in Video mode can take up to 20 minutes.

Note

 

1.If the TV line system of the disc is different to the current setting of the recorder, you will not be able to finalize the disc. See 

 

Additional infor-

mation about the TV system settings

 

 on page 116 for how to change the recorder’s setting.

VR mode

Video mode

TITLE MENU

TITLE MENU

DVRRT601HS_WV_EN.book 59 ページ 2005年8月3日 水曜日 午後3時31分

Downloaded From DvDPlayer-Manual.com Pioneer Manuals

Summary of Contents for DVR-RT604H-S









































































































































Reviews: