PRO-1010HD
193
5
6
7
8
5
6
7
8
C
D
F
A
B
E
S-VIDEO
OUT
R
L
B
R
VD
R
L
HD (H/V SYNC)
G(ON SYNC)
INPUT3
VIDEO
INPUT4
INPUT 3/4
ANALOG RGB
AUDIO
AUDIO
INPUT5
IN
HDMI
HDMI
-
0
9
L
POWER
OFF
ON
AC IN
SPEAKER
8
~16
+
-
=
~ !
$
#
1
4
6
CONTROL
OUT
RS-232C
R
SPEAKER
8
~16
+
-
8
ANALOG RGB IN
D-Sub
AUDIO
INPUT1
INPUT2
INPUT1
AUDIO
R
L
R
L
2
3
5
7
@
Plasma Display Section
The plasma display is provided with 6 video input
connectors, 1 video output connector , audio input/output
jacks and speaker terminals together with a CONTROL
OUT connector for connecting to PIONEER components
bearing the
mark.
For instructions regarding connections, consult the pages
noted in parentheses by each item.
1
SPEAKER (R) terminal
For connection of an external right speaker.
Connect a speaker whose impedance is 8 –16 .
2
CONTROL OUT
For connection of PIONEER components that bear the
mark. Making CONTROL connection enables
control of this unit as a component in a system.
3
RS-232C
Never connect any component to this connector
without first consulting your Pioneer installation
technician.
This connector is used for plasma display setup
adjustments.
4
ANALOG RGB IN (INPUT1) (mini D-sub 15 pin)
For connecting components equipped with RGB
outputs jacks, such as a personal computer or external
RGB decoder; or components equipped with
component output jac ks, such as a DVD recorder.
Make sure that the connection made corresponds to
the format of the signal output from the connected
component. Select this INPUT or the HDMI INPUT
(
6
) for INPUT 1 in [INPUT1 SELECT] in the menu.
5
AUDIO (INPUT1) (RCA pin jack)
Use to obtain sound when INPUT1 is selected.
Connect this jack to the audio output connector of the
device connected to the plasma display’s INPUT1 (D-
sub or HDMI (analog audio)).
Note
The left audio channel (L) jack is not compatible with
monaural input sources.
Illustration depicts PRO-1010HD model.
Ω
Ω
Ω
Ω
Ω
CONNECTION PANEL
