20
Connecting your equipment
03
Determining the speakers’ application
This unit is equipped with speaker terminals for 11 channels, allowing users to select a variety of speaker layouts/
usage patterns according to their tastes. The terminals to which the speakers should be connected differ accord-
ing to the speaker layout/usage pattern. Select one speaker layout/usage pattern before connecting the speakers.
For instructions on connections, see
Installing your speaker system
.
However, the
5.2 +ZONE 2+ZONE 3
and
Multi-ZONE Music
settings can be used separately according to the
situation. Normally set this to
5.2 +ZONE 2+ZONE 3
and use this for multi-zone/multi-source playback, and when
using the system for home parties for example, set this to
Multi-ZONE Music
to associate all zones with the main
zone.
!
Be sure to connect speakers to the front left and right channels (
L
and
R
).
!
It is also possible to only connect one of the surround back speakers (
SB
) or neither.
!
If you have two subwoofers, the second subwoofer can be connected to the
SUBWOOFER 2
terminal.
Connecting two subwoofers increases the bass sound to achieve more powerful sound reproduction.
!
When none of the top middle, top f top backward, front height, front wide, and surround back speak-
ers are connected, Dolby Atmos does not play.
Choose one from Plans [A] to [N] below.
Important
!
The
Speaker System
setting must be made if you use any of the connections shown below other than [A] (see
).
!
The speakers from which sound is output can be switched according to the speaker layout/usage pattern
(sound is not necessarily output from all connected speakers). Use the
OUT P.
button to switch the speakers
from which sound is output. For details, see
Switching the speaker terminals
.
[A] 7.2.2 channel surround system (Surround back/Top middle) connection
*Default setting
!
Speaker System
setting:
7.2.2/5.2.2/7.2ch
SBR
TMdL
TMdR
SBL
SR
SL
R
SW2
C
SW1
L
A 7.2.2 ch surround system connects the left and right front speakers (
L
/
R
), the center speaker (
C
), the left and
right top middle speakers (
TMdL
/
TMdR
), the left and right surround speakers (
SL
/
SR
), the left and right surround
back speakers (
SBL
/
SBR
), and the subwoofers (
SW 1
/
SW 2
).
This surround system produces a more true-to-life sound from above.
Playback of Dolby Atmos requires a connection with surround back speakers or top middle speakers.
[B] Dolby Enabled Speaker system connection
!
Speaker System
setting:
7.2.2/5.2.2/7.2ch
,
9.2.2ch TMd/FH
,
7.2.2ch Front Bi-Amp
,
7.2.2/7.2ch + SP-B
—
Speaker Setting
TMd
:
Dolby Sp (Front)
SBR
TMdL
TMdR
SBL
SR
SL
R
SW2
C
SW1
L
—
Speaker Setting
TMd
:
Dolby Sp (Surr)
SBR
TMdL
TMdR
SBL
SR
SL
R
SW2
C
SW1
L
—
Speaker Setting
TMd
:
Dolby Sp (SB)
SBR
TMdL
TMdR
SBL
SR
SL
R
SW2
C
SW1
L
