En
12
04
Section
Tuner
Storing and recalling broadcast
frequencies
If you press any of the
PRESET TUNING
buttons
you can easily store up to six broadcast frequen-
cies for later recall with the touch of a button.
When you find a frequency that you want to
store in memory press a
PRESET TUNING
but-
ton and hold until the preset number stops
flashing
.
The number you have pressed will flash in the
PRESET NUMBER
indicator and then remain lit.
The selected radio station frequency has been
stored in memory.
The next time you press the same
PRESET TUN-
ING
button the radio station frequency is
recalled from memory.
Notes
• Up to 18 FM stations, 6 for each of the three
FM bands, and 6 MW/LW stations can be
stored in memory.
• You can also use
5
and
∞
to recall radio sta-
tion frequencies assigned to
PRESET TUNING
buttons.
Tuning in strong signals
Local seek tuning lets you tune in only those
radio stations with sufficiently strong signals for
good reception.
1 Press
FUNCTION
to select
LOCAL
.
Press
FUNCTION
until
LOCAL
appears in the
display.
2 Press
5
to turn local seek tuning on.
Local seek sensitivity (e.g.,
LOCAL 2
) appears in
the display.
3 Press
2
or
3
to set the sensitivity
.
There are four levels of sensitivity for FM and
two levels for MW/LW:
FM: LOCAL 1
—
LOCAL 2
—
LOCAL 3
—
LOCAL 4
MW/LW: LOCAL 1
—
LOCAL 2
The
LOCAL 4
setting allows reception of only the
strongest stations, while lower settings let you
receive progressively weaker stations.
4 When you want to return to normal seek
tuning, press
∞
to turn local seek tuning off.
LOCAL :OFF
appears in the display.
