11
Operating with Head Unit
Direct Recall
• Press one of buttons 1–6 to recall a station preset under that button.
Note:
• To recall Preset channels 7–12, perform Preset Tuning with
5
/
∞
buttons.
Entering the Function Menu
• Press the FUNCTION button to select the desired mode in the Function
Menu.
Each press of the FUNCTION button selects the mode in the following order:
FUNC 1 (Preset Scan/BSSM)
=
FUNC 2
=
FUNC 3
=
FUNC 4
=
AUTO/MANUAL (Switching the Tuning Mode)
Note:
• In FUNC 1, Preset Scan or BSSM is selected by changing the length of time you press the
5
/
∞
button.
• There are no functions in FUNC 2, FUNC 3 or FUNC 4.
Preset Scan
This lets you view up to 12 stations stored in the Preset Channels one after the other.
Switching the Tuning Mode
You can select between Manual Tuning (MANUAL) and Seek Tuning (AUTO). Press the
5
/
∞
button, or other button as appropriate, and tuning is performed in the selected tuning
mode.
Using the PGM Button
The PGM (PGM/DSP) button operates in a different way depending on the function
programmed (memorized). (For details concerning programming the PGM (PGM/DSP)
button, refer to the Head Unit’s operation manual.)
• Press the PGM (PGM/DSP) button.
Function
Press
Hold for 2 seconds
Preset Scan/BSSM (FUNC1)
Preset Scan ON/OFF
BSSM ON/OFF
Switching the Tuning Mode
Select
_____
(AUTO/MANUAL)
Preset ch. List
Read the Operation Manual of a Head Unit that can use this function.
