17
GM-222
Fuse (30
A)
Grommet
Special red battery wire [RD-222] (sold separately).
After making all other connections at the amplif
ier
,
connect the battery wire terminal of the amplif
ier to
the positi
v
e (+) terminal of the battery
.
Ground wire (black) [RD-222]
(sold separately).
Connect to metal body or chassis.
Fuse (20
A)
Car stereo with
RCA output jacks
External Output
Connecting wires with RCA pin
plugs
(sold separately).
RCA input jack
Speak
er terminal
See the “Connecting the
Speak
er wires”
section
for speak
er connection
instructions.
Blue
Connect the male terminal of this wire to the blue wire of
the car stereo (SYSTEM REMO
TE CONTR
OL).
The
female terminal can be connected to the auto-antenna relay
control terminal. If the car stereo does not ha
v
e a system
remote control terminal,
connect the male terminal to the
po
wer terminal through the ignition switch.
Fuse (30 A)
Grommet
Special red battery wire
After making all other connections at the amplifier,
connect the battery wire terminal of the amplifier to
the positive (+) terminal of the battery.
Ground wire (black)
Connect to metal body or chassis.
Fuse (20 A)
Car stereo with
RCA output jacks
External Output
Connecting wires with RCA pin
plugs
(sold separately).
RCA input jack
Speaker output terminal
See the “Connecting the
Speaker wires” section
for speaker connection
instructions.
Blue
Connect the male terminal of this wire to the blue wire of the car
stereo (SYSTEM REMOTE CONTROL). The female terminal can be
connected to the auto-antenna relay control terminal. If the car stereo
does not have a system remote control terminal, connect the male ter-
minal to the power terminal through the ignition switch.
(2) ES and EW models
-
CONNECTION DIAGRAM
(1) UC model
Fig. 9
Fig. 10
