5
Insert the O-ring rubber grommet into the
vehicle body.
6
Drill a 14 mm hole into the vehicle body.
2
Twist the battery wire, ground wire
and system remote control wire.
Twist
3
Attach lugs to wire ends.
Use pliers, etc., to crimp lugs to wires.
1
Lug (sold separately)
2
Battery wire
3
Ground wire
4
Connect the wires to the terminal.
Fix the wires securely with the terminal
screws.
1
System remote control terminal
2
Ground terminal
3
Power terminal
4
Terminal screws
5
Battery wire
6
Ground wire
7
System remote control wire
Connecting the speaker
output terminals
1
Use wire cutters or a utility knife to
strip the end of the speaker wires to ex-
pose about 10 mm of wire and then twist
the wire.
Twist
2
Attach lugs to wire ends.
Use pliers, etc., to crimp lugs to wires.
1
Lug (sold separately)
2
Speaker wire
3
Connect the speaker wires to the
speaker output terminals.
Fix the speaker wires securely with the term-
inal screws.
En
9
English
Section
03
Connecting the units
