background image

Before you start

En(1/9)

Thank you

 for purchasing this PIONEER 

product

To ensure proper use, please read through this 
manual before using this product. It is espe-
cially important that you read and observe 

WARNINGS

 and 

CAUTIONS

 in this manual. 

Please keep the manual in a safe and accessi-
ble place for future reference.

Information to User

Alteration or modifications carried out without 
appropriate authorization may invalidate the 
user’s right to operate the equipment.

Note

This equipment has been tested and found 

to comply with the limits for a Class B digital 

device, pursuant to Part 15 of the FCC Rules. 

These limits are designed to provide reason-

able protection against harmful interference 

in a residential installation. This equipment 

generates, uses and can radiate radio fre-

quency energy and, if not installed and used 

in accordance with the instructions, may 

cause harmful interference to radio commu-

nications. However, there is no guarantee 

that interference will not occur in a particu-

lar installation. If this equipment does cause 

harmful interference to radio or television 

reception, which can be determined by 

turning the equipment off and on, the user is 

encouraged to try to correct the interference 

by one or more of the following measures: 

 

Reorient or relocate the receiving 

antenna.

 

Increase the separation between the 

equipment and receiver.

 

Connect the equipment into an out-

let on a circuit different from that to 

which the receiver is connected.

 

Consult the dealer or an experienced 

radio/TV technician for help.

FEDERAL COMMUNICATIONS 
COMMISSION SUPPLIER’S DECLARATION 
OF CONFORMITY
Product Name: Marine Mono Amplifier
Model Number: GM-ME300X1C
Responsible Party Name: PIONEER 
ELECTRONICS (USA) INC.
SERVICE SUPPORT DIVISION
Address: 2050 W. 190TH STREET, SUITE 100, 
TORRANCE, CA 90504, U.S.A.
Phone: 1-800-421-1404
URL: 

https://www.pioneerelectronics.com

After-sales service for 

Pioneer products

Please contact the authorized Pioneer dealer 

from which you purchased this unit or an 

authorized Pioneer service company for after-

sales service or questions you may have about 

the product. You may contact Pioneer directly 

as follows: 

Do not ship your unit in for repair 

VHSGNTSÐBNMS@BSHMFÐ/HNMDDQÐÆQRSÐ

Units sent without a return authoriza-

SHNMÐMTLADQÐVHKKÐADÐQDETRDC

USA & CANADA

Pioneer Electronics (USA) Inc.
CUSTOMER SUPPORT DIVISION
P.O. Box 1760
Long Beach, CA 90801-1760 U.S.A.
800-421-1404

For warranty information, please see the 
Limited Warranty sheet included with this 
unit. 

Visit our website

U.S.: 

https://www.pioneerelectronics.com

Canada:

https://www.pioneerelectronics.ca

  Learn about product updates (such as 

firmware updates) for your product.

  Register your product.

  Access owner’s manuals, spare parts infor-

mation, service information, and much more.

Summary of Contents for GM-ME300X1C














Reviews: