En(8/10)
Example of speaker setting and speaker
connection
Four channel output
CH-A
CH-B
STEREO
STEREO
STEREO
STEREO
(L)
(L)
(R)
(R)
Three channel output
CH-A
CH-B
STEREO
MONO
STEREO
(L)
(L)
(R)
(R)
Two channel output
CH-A
CH-B
MONO
MONO
(L)
(L)
(R)
(R)
When in MONO connection, a monaural
signal is output, which is a mix of the left and
right channel signals.
Speaker setting and power output
MONO
2CH
2
:
—
75 W
4
:
150 W
75 W
Connections when using the
speaker input wire
Connect the headunit speaker output wires to
the amplifier using the supplied speaker input
wire with RCA pin cord.
Make sure to switch the
INPUT SENS switch
to
SP (speaker)
.
1
Headunit
2
Speaker output
3
Red: Right
4
Black: Right
5
Black: Left
6
White: Left
7
Speaker input wire with RCA pin cord to
the RCA input jack of this unit
Note
If speaker input wires from a headunit are
connected to this amplifier, the amplifier will
automatically turn on when the headunit is
turned on. When the headunit is turned off,
the amplifier turns off automatically. This
function may not work with some headunits.
In such cases, make sure that the front chan-
nel is connected correctly. If the function still
does not work, please use a system remote
control wire (sold separately). If multiple
amplifiers are to be connected together
synchronously, connect the headunit and all
amplifiers via the system remote control wire.
