30
Operation
Oper
ation
4
Last Scene Memory
DVD
This unit memorizes the last scene from
the last disc that is viewed. The last scene
remains in memory even if you remove the
disc from the player or switch off (Stand-
by mode) the unit. If you load a disc that
has the scene memorized, the scene is
automatically recalled.
NOTE
• This unit may not memorize the last scene
depending on the type of disc.
• This unit memorizes the last scene after
pressing
during playback.
A-B Repeat
DVD
VCD
ACD
The A-B Repeat function allows you to
specify two points (A and B) within a track
(CD, Video CD/Super VCD) or title (DVD)
that form a loop which is played over and
over.
1. During playback, press either
HOME
MENU
and select “Play Mode”.
2. Select “A-B Repeat”.
3. Press
ENTER
on “A (Start Point)” to set
the loop start point.
4. Press
ENTER
on “B (End Point)” to set
the loop end point.
After pressing
ENTER
, playback jumps
back to the start point and plays the
loop.
5. To resume normal playback, select
“Off”.
Creating a program list
DVD
ACD
VCD
This feature lets you program the play
order of titles/chapters/tracks on a disc.
1. During playback, press
HOME MENU
and select “Play Mode”.
2. Select “Program” then select “Create/
Edit” from the list of program options.
3. Use
/ / /
and
ENTER
to select a title,
chapter or track for the current step in
the program list.
• For a DVD disc, you can add a title or
a chapter.
• For a CD or Video CD/Super VCD,
select a track to add to the program
list.
After pressing
ENTER
to select the
title/chapter/track, the step number
automatically moves down one.
4. Repeat step 3 to build up a program list.
A program list can contain up to 24
steps.
• You can insert steps by just
highlighting the position where you
want the new step to appear and
entering a title/chapter/track number.
• To delete a step, highlight it and press
CLEAR
.
5. To play the program list, press
PLAY
.
Program play remains active until you
turn off program play (see page 31),
erase the program list, eject the disc or
switch off.
