41
KEX-M9086ZT,M9086ZT-91
LAN-CHECK mode
System Check mode
Diagnosis Memory mode
Beep
Display
•
The system displays the physical address of each
device connected to A
VC-LAN in sequence from
the lowest address.
Example:
1
—
1E0
Serial No.
Physical address
(CD commander)
•
When changing to another mode
Blinking "SYS" is displayed.
•
After completing System Check
Displays a physical address.
••Identifies the device.
Example:
H
150
Physical address (1DIN-TV)
Distinguishes from LAN-CHECK.
Displays a Diagnostic code.
••Identifies the type of error
.
Example:
1
—
d2
Serial No.
Diagnostic code
(no response to periodical
communications)
Max. 6 for each physical address
Displays an auxiliary code
••Identifies the device involved in the error
.
Example:
1
—
360
Serial No.
Physical address (CD-CH)
1DIN-TV has recorded an error indicating there
is no response to periodical communications
in CD-CH.
1
—
———
When there is no physical address:
Displays a physical address.
The next lowest physical address
•
When there is no Diagnostic code after completion
of System Check
00
The system changes as shown above, as this unit
does not include System Check.
•
The system beeps three times
when changing to another mode.
•
The system beeps once every time
a physical address is displayed.
•
When changing to another mode
Blinking "CODE" is displayed.
•
Then, "Latest periodical communications
number" is displayed.
••Elapsed time at the current point is displayed.
Example:
1F
Elapsed time (31 minutes)
•
The system displays a number fr
om 00 to
FF (increases a digit every minute).
•
When 256 minutes are reached, the system
returns to 00.
•
Displays the details of Diagnosis.
Displays a physical address.
(Same as the left.)
Displays a periodical communications
number
.
••Displays the time when the error occurred.
Example:
1
—
02
Serial No. Elapsed time (2 minutes)
Displays Diagnostic code. (Same as the left.)
Displays an auxiliary code. (Same as the left.)
Displays a physical address.
•
When there is no Diagnostic data:
00
•
The system beeps three times
when changing to another mode.
•
The system beeps once every time
a physical address is displayed.
•
The system beeps three times
when starting up Diagnosis.
-
Go to Diagnosis (Beep and Display)
Summary of Contents for KEX-M9086ZT-91/UC
