4
En
Assembling the Stand
Ìi
• Always assemble it on a flat table etc.
• Insert the screws in the holes vertically and do not tighten
them with more force than necessary.
Assembly Procedure
1
Select the support columns to attach.
Select the support columns according to the Pioneer
television that you have purchased (Only one type of the
two types of available support columns should be used).
When the Pioneer television you have purchased
is under speaker models.
[Support column used: support column L (long
columns)]
4VQQPSUDPMVNOVTFE
TVQQPSUDPMVNO-
MPOHDPMVNOT
When the Pioneer television you have purchased
is except under speaker models.
[Support column used: support column S (short
columns)]
4VQQPSUDPMVNOVTFE
TVQQPSUDPMVNO4
TIPSUDPMVNOT
2
Secure the support column to the stand
with the Installation screws
(4 locations
on the left and right).
Using the enclosed hexagonal wrench, first loosely
attach the top attachment screw, then loosely attach the
bottom attachment screw.
5IFMBSHFSIPMFT
BSFPOUIFGSPOU
*OTUBMMBUJPOTDSFXT
.YNNTJMWFS
3
Fully tighten the Installation screws (4
locations on the left and right).
'VMMZUJHIUFOUIFBUUBDINFOUTDSFXT
Ìi
Be sure to carefully store the unused support columns,
the hexagonal wrench, the C wrench, and the Operating
Instructions together.
PDK-TS36B_AZR1279B.indb 4
2008/07/07 9:32:32
Summary of Contents for KURO PDK-TS36B
Page 1: ......