Setting up
08
37
En
English
Power Management (PC source only)
The system will be automatically placed into the standby mode
when no signal is received from the personal computer.
1
Press HOME MENU.
2
Select “Power Control” (
/
then ENTER).
3
Select “Power Management” (
/
then ENTER).
4
Select “Mode 1” or “Mode 2” (
/
then ENTER).
5
Press HOME MENU to exit the menu.
Note
• This function is not selectable when the PC is connected to the
HDMI terminal.
Item
Description
Off (default)
No power management
Mode 1
• Places the system into the standby mode when
no signal is received from the personal computer
for eight minutes.
• Even when you start using the computer and a
signal is received again, the system stays off.
• The system is switched on again by pressing
STANDBY/ON
on the plasma television or
a
on
the remote control unit.
Mode 2
• Places the system into the standby mode when
no signal is received from the personal computer
for eight seconds.
• When you start using the computer and a signal
is input again, the system is switched on.
• The system is switched on again by pressing
STANDBY/ON
on the plasma television or
a
on
the remote control unit.
PDP-5080XD.book Page 37 Friday, April 27, 2007 1:12 PM
