Useful adjustment settings
11
54
En
Changing the brightness at both sides
of the screen (Side Mask)
With the 4:3, FULL 14:9, or CINEMA 14:9 screen size, you can
change the brightness of the grey side masks that appear at both
sides of the screen.
1
Press HOME MENU.
2
Select “Option” (
/
then ENTER).
3
Select “Side Mask” (
/
then ENTER).
4
Select “Brightness Sync.” (
/
).
5
Select the desired parameter (
/
).
Important
• The “Auto” setting adjusts the brightness of the side masks
according to the brightness of the screen and can reduce the
possibility of image retention.
6
Press HOME MENU to exit the menu.
Blue LED Dimmer
You can adjust the brightness of the POWER ON indicator
depending on the brightness level of the viewing area.
1
Press HOME MENU.
2
Select “Option” (
/
then ENTER).
3
Select “Blue LED Dimmer” (
/
then ENTER).
4
Select “High”, “Mid” or “Low” (
/
then ENTER).
5
Press HOME MENU to exit the menu.
Orbiter
This function automatically shifts the image little by little to reduce
the occurrence of the burning.
1
Press HOME MENU.
2
Select “Option” (
/
then ENTER).
3
Select “Orbiter” (
/
then ENTER).
4
Select “On” (
/
then ENTER).
5
Press HOME MENU to exit the menu.
• To cancel this function, select “Off” in step 4.
Note
• When the Orbiter function is set to “On”, the image may appear
to drop slightly on the screen.
• This function does not operate when PC signals are received.
Video Pattern
You can display the Video Pattern screen that also helps eliminate
after-image when it occurs.
1
Press HOME MENU.
2
Select “Option” (
/
then ENTER).
3
Select “Video Pattern” (
/
then ENTER).
A confirmation screen appears.
4
Select “Start” (ENTER).
The Video Pattern screen displays.
Note
• The system is automatically placed into standby one hour after
the Video Pattern screen has started.
• While the Video Pattern screen is on, no buttons operate except
a
on the remote control unit,
STANDBY/ON
and
a
on the
plasma television.
• To cancel the Video Pattern screen, press
a
on the remote
control unit,
STANDBY/ON
or
a
on the plasma television.
• The Video Pattern timer has priority over the sleep timer. When
the Video Pattern timer is on, the sleep timer becomes
ineffective.
Item
Description
Fixed
(default)
Always sets the same brightness for the grey side
masks
Auto
Adjusts the brightness of the grey side masks
according to the brightness of images
PDP-5080XD.book Page 54 Friday, April 27, 2007 1:12 PM
