Using the HDMI Control
13
68
En
Chapter 13
Using the HDMI Control
Using the HDMI Control functions
You can operate such Pioneer devices as a recorder, player or AV system that
support the HDMI Control functions using the remote control of the flat screen
TV.
The HDMI Control functions include playback of content using on-screen control
panel on the flat screen TV, recording of a TV programme while watching, timer
recording using a programme list on the connected recorder, and confirmation
of timer recording registered in the recorder. For details, see the table below.
Note
• The KURO LINK function name used on the web and in catalogues is referred
to as HDMI Control in the operating instructions and on the product.
• Maximum number of devices that can be connected and controlled using the
remote control unit of the flat screen TV is as follows: recorder x 2, player x 2
or AV system x 1.
• Not all device operations may be available for HDMI Control functions.
HDMI Control functions
Note
• When using the HDMI Control functions, operate the remote control unit
while pointing it toward the remote control sensor (
t
) located at the bottom
right of the front panel of the flat screen TV.
• You cannot use two or more HDMI terminals at the rear of the flat screen TV
at the same time except “Power Off” and “Display Language Setup” functions.
On-screen control panel
For an AV system
Press
or
on the remote control unit of the flat screen TV to switch the
surround mode in order or in reverse order,
or
to switch the input source in
order or in reverse order. Pressing
HDMI CONTROL
closes the control panel to
return to the HDMI Control menu.
Note
• You cannot operate the recorder/player when you press
or
to switch the
input source during operation. To resume the operation, return to the HDMI
Control menu and select the desired function again.
For a recorder
Press
or
on the remote control unit of the flat screen TV to select fast
reverse or fast forward mode,
to skip commercials or
to stop playback.
Pressing
ENTER
starts playback and
HDMI CONTROL
closes the control panel to
return to the HDMI Control menu.
Function
Description
Usable
devices
Playback of
content
The proper input source is automatically
selected and the content is played back on the
flat screen TV as you press PLAY on the
connected device
Recorder/
player
On-screen
control
Recorder/player operation can be controlled
on-screen or with the remote control unit of
the flat screen TV (play, stop, fast forward/
reverse, etc.)
Recorder/
player
Recording of
TV
programme
The programme now watching can be
recorded using the remote control unit of the
flat screen TV
Recorder
Timer
recording
Timer recording using a programme list on
the recorder connected
Recorder
Confirmation
of recording
schedule
Recording schedule registered in the recorder
can be displayed and confirmed on the screen
using the remote control unit of the flat screen
TV
Recorder
Display
Language
Setup
Information on the display menu language is
transferred to the recorder or player
connected to the flat screen TV. For details,
see the operation manual that came with the
recorder or player.
Recorder/
player
AV system
control
Receiver/amplifier operation can also be
controlled with the remote control unit of the
flat screen TV (volume, surround mode and
input selection of the HDMI terminal)
AV system
Power On
The connected recorder can be turned On
when the flat screen TV is turned On.
The flat screen TV can be turned On when the
connected recorder(s) or player(s) is turned
On and images are input to the flat screen TV.
Recorder
Recorder/
player
Power Off
The connected device(s) can be turned Off
when the flat screen TV is turned Off
Recorder/
player/AV
system
• Press
i
+
/
–
or
e
to adjust volume
for the AV system.
• Press
,
,
,
,
ENTER
,
RETURN
(
) colour (
RED
,
GREEN
,
YELLOW
,
BLUE
) or
TOOLS
buttons to use such
functions as the disc navigator and
electronic programme guide (EPG) on
the connected recorder or player.
Exit
HDMI Control
****
INPUT+
INPUT-
S
SURROUND-
1
4
3
5
7
6
2
2
Switches the surround mode in order
Switches the input source in reverse
order
Switches the surround mode in reverse
order
Closes the control panel to return to the
HDMI Control menu
Displays the model number of the
connected device
Switches the input source in order
Void
1
2
3
4
5
6
7
Exit
HDMI Control
****
1
4
3
5
7
6
2
2
Skips commercials
Fast reverse
Stops playback
Closes the control panel to return to the
HDMI Control menu
Displays the model number of the
connected device
Fast forward
Starts playback
1
2
3
4
5
6
7