automatic dump program execution switch is off, the player enters
Random
Access Mode
and begins playing the disc.
In Random Mode (when search is not in progress)
The player starts playing the disc.
During a search
After the search ends, the player starts playing the disc.
NOTE:
Audio is not squelched while the disc is playing. When the lead-out is
reached during normal play, the player automatically spins down the disc, enters
Park Mode
and waits for one of several specific instructions — to reject the disc (by
pressing the OPEN/CLOSE button on the front of the player), to play the disc
again (by pressing PLAY on the front of the player or on the remote control), or to
turn off the player by pressing the Power-OFF button on the front of the player.
If the “Side Repeat” On-Screen Function has been set to ON, the player
automatically searches to the beginning of the disc and plays it again. When a
PLAY command is sent to the player either from the remote control, from the front
panel buttons, from a computer, or from the player’s memory, the player enters
Random Access Mode
, and many other instructions can be sent to the player.
3) STOP
Function:
Pressing this button causes the player to stop playing the disc and to
present a still frame.
Explanation:
Stop is effective only in
Random Access Mode
. The result of
pressing this button to send a stop command differs, depending on the operation
being performed when it is sent. If it is sent during:
A search
After a search, the player holds a still frame.
A still operation
The player is not affected; the player continues to present a still frame.
Any other operation
The player presents a still frame.
NOTE:
Audio is squelched while the player holds a still frame.
Chapter Three • LD-V8000 Level I & III
RU-V6000T ONLY
3-8
TP 113 v. 2.1 • 2/93
LD-V8000 Level I & III User’s Manual
