manualshive.com logo in svg

Pioneer LD-V8000 Level I, User Manual

The Pioneer LD-V8000 Level I User Manual is now available for free download on our website. This comprehensive manual provides detailed instructions and essential information about operating the LD-V8000 Level I product. Enhance your user experience by accessing the manual conveniently at 88.208.23.73:8080.

Share
Download
background image

8) SEARCH

Function:

Pressing this button instructs the player to search to the address

specified by the argument. When the search is completed, the LD-V8000 displays
a still screen on a CAV or CLV disc. 

Explanation:

This command searches for the address specified by the argument.

Unless a button is pressed during the search, the player holds a still frame when
the search is completed.  If the CLEAR button is pressed during a search, the
player stops the search when the CLEAR command is received and holds a still
frame.  If the REJECT button is pressed during a search, the player stops the
search and enters 

Reject Mode

.  If the PLAY or MULTI-SPEED button is pressed,

the player continues the search, then starts play or multi-speed after the search.
A search is executed when a search address is written into the Search Register.
The player then compares the current address with the address in the Search
Register and moves the pickup at high speed until the difference between the
search address and the current address becomes zero. 

NOTE: 

If an argument is set to a chapter number larger than the ones stored on

the disc, the player searches to the beginning of the chapter with the largest
chapter number.  If the argument is set to a frame number larger than the ones
stored on the disc and the set frame number does not exceed 65535, the player
searches to the final frame number encoded on the disc before lead-out.  If the set
frame number exceeds 65535, the player searches to the address which is the
difference between the argument and 65536. (ie. If you enter 75,536 SEARCH, the
player will search to frame 10,000.)

If the argument is set to a time or extended time number larger than the ones
stored in a CLV disc, the player searches to the highest number located just before
lead-out. 

NOTE:

During a search, the video still frame is held in the player’s

memory and audio is squelched. 

9) AUTO STOP

Function:

Pressing this button instructss the player to play at normal speed up

to the address specified by the argument and then hold a still frame. 

Explanation:

The player plays at normal speed up to the address specified by the

argument.  If the specified address is less than the current address, the player
plays in reverse at normal speed.  If the specified address is greater than the
current address, the player plays forward at normal speed.  When the specified
address is reached, the player holds a still frame. 

The auto stop is performed when the target address is written into the Auto Stop
Register.  When the target address is written into the Auto Stop Register, the
player plays at the normal speed and compares the address in the Auto Stop
Register with the current address.  When the current address becomes equal to
the address in the Auto Stop Register, the player enters 

Still Mode

. 

LD-V8000  Level I & III • Chapter Three

RU-V6000T ONLY

RU-V6000T & RU-V103

LD-V8000 Level  I & III User’s Manual

TP 113

v. 2.1 • 2/93

3-11

Summary of Contents for LD-V8000 Level I






























































































































































Reviews:

No comments

Related manuals for LD-V8000 Level I

Samsung UBD-M9000 User Manual preview
UBD-M9000
Brand: Samsung Pages: 21
Samsung UBD-M7500 User Manual preview
UBD-M7500
Brand: Samsung Pages: 81
Samsung BD-J5500 Operating Instructions Manual preview
BD-J5500
Brand: Samsung Pages: 48
Samsung BD-D5250C Software Manual preview
BD-D5250C
Brand: Samsung Pages: 3
PROEM MDC-2F4 User Manual preview
MDC-2F4
Brand: PROEM Pages: 9
Radio Shack CD-3315 Owner'S Manual preview
CD-3315
Brand: Radio Shack Pages: 22
Laser Mini Mate MP3-2GA8 User Manual preview
Mini Mate MP3-2GA8
Brand: Laser Pages: 7
Salora DVD225M User Manual preview
DVD225M
Brand: Salora Pages: 70
Sungale DVD-2028 User Manual preview
DVD-2028
Brand: Sungale Pages: 31
Vitek VT-3774 Instruction Manual preview
VT-3774
Brand: Vitek Pages: 16
Bush 08MP08 User Manual preview
08MP08
Brand: Bush Pages: 42
Rotel RDV-1060 Technical Manual preview
RDV-1060
Brand: Rotel Pages: 19
Sealey SM1311 Instructions preview
SM1311
Brand: Sealey Pages: 4
Slacker G1 4GB User Manual preview
G1 4GB
Brand: Slacker Pages: 26
Darling Downs Soaring Club Hornet VH-GKJ Pilot Handling Manual And Conversion Document preview
Hornet VH-GKJ
Brand: Darling Downs Soaring Club Pages: 19
Aiwa EV600B Operating Instructions preview
EV600B
Brand: Aiwa Pages: 2
Zenith DVB712 Operation Manual preview
DVB712
Brand: Zenith Pages: 24
Alcad 915 Series Quick Start Manual preview
915 Series
Brand: Alcad Pages: 9

Brands by name

Popular brands

Load more brands