17
C:\Program Files (x86)\Adobe\AdobeFrameMaker12\Structure\xml\Pioneer\1.0\020Chapter.fm
MVH-G210BT/MVH-G110
19_XL_EU_QRI3073(A5_Horizontal)
En
English
[Fader/Balance]
Touch
or
to adjust the front/rear speaker balance. Set
[Front] and [Rear] to [0] when using a dual speaker system.
Touch
or
to adjust the left/right speaker balance.
TIP
You can also set the value by dragging the point on the displayed table.
NOTE
Only the fader can be adjusted when [Rear] is selected as the
speaker mode.
[Source Level Adjuster]
[-4] to [+4]
Adjust the volume level of each source to prevent radical
changes in volume when switching between sources other
than FM.
Touch
or
to adjust the source volume after
comparing the FM tuner volume level with the level of the
source.
TIP
If you directly touch the area where the cursor can be moved, the
SLA (source level adjustment) setting will be changed to the value
of the touched point.
NOTES
•
Settings are based on the FM tuner volume level, which remains
unchanged.
•
This function is not available when the FM tuner is selected as
the AV source.
[Subwoofer]
[On] [Off]
Select enable or disable subwoofer output from this
product.
[Speaker Level]
[Front Left] [Front Right]
[Rear Left] [Rear Right]
[Subwoofer] [Listening
Position]
Adjust the speaker output level of the listening position.
1
Touch
or
to select the listening position then
select the output speaker.
2
Touch
or
to adjust the selected speaker output
level.
NOTE
For rear speaker, this function is available only when [Rear] is
selected in [Preout].
[Subwoofer Settings]
Select the subwoofer phase and LPF cut-off frequency
(page
17).
[Listening Position]
[Off] [Front Left] [Front
Right] [Front] [All]
Select a listening position that you want to make as the
center of sound effects.
[BASS Boost]
[0] to [+6]
Adjust the bass boost level.
Menu Item
Description
You can adjust the LPF cutoff frequency value for subwoofer.
NOTE
[Subwoofer Settings] is available only when [Subwoofer] is [On].
1
Press
.
2
Touch
then
.
3
Touch [Subwoofer Settings].
4
Touch
or
to set the cutoff position.
The following items can also be set.
Switches the subwoofer phase between normal and reverse position.
LPF
Switches the LPF setting to [On] or [Off].
Video settings
The menu items vary according to the source.
Menu Item
Description
[Time Per Photo Slide]
[5sec] [10sec] [15sec]
[Manual]
Select the interval of image file slideshows on this product.
[Loudness]
[Off] [Low] [Mid] [High]
Compensates for deficiencies in the low-frequency and
high-frequency ranges at low volume.
NOTE
This function is not available while you make or receive a call using
the hands-free function. (MVH-G210BT)
Adjusting the LPF cutoff frequency value
[Time Per Photo Slide]
Menu Item
Description
Pioneer MNR.book Page 17 Wednesday, July 18, 2018 3:59 PM
