- 24 -
En
g
lis
h
SPEAKER LEVEL
Types of speaker:
[FRONT L],
[FRONT R], [REAR L], [REAR R],
[SUBWOOFER]
Output level:
[–24] to [10]
Select a speaker unit (filter) and adjust the
output level.
•
Each value you have adjusted changes when
you change the [POSITION] setting (page 24).
CROSSOVER
Select a speaker unit (filter) to adjust the HPF or
LPF cut-off frequency and the slope for each
speaker unit.
For details on the [CROSSOVER] setting, see
page 21.
POSITION
[OFF], [FRONT LEFT] (front seat
left), [FRONT RIGHT] (front seat
right), [FRONT] (front seats), [ALL]
Select a listening position to adjust the speakers'
output levels automatically and add a delay time
that corresponds to the number and locations of
occupied seats.
TIME ALGNMNT
[INITIAL], [OFF], [CUSTOM]
Select a type of speaker and
adjust the speaker distance for
further customizing in [CUSTOM].
Types of speaker:
[FRONT L],
[FRONT R], [REAR L], [REAR R],
[SUBWOOFER]
Speaker distance (inch):
[140] to
[0]
Select or customize the time alignment settings
to reflect the distance between the listener’s
position and each speaker.
•
Select [INITIAL] to initialize the setting value.
•
Select [OFF] to reset all setting values to 0.
•
The [CUSTOM] setting is available when
[FRONT LEFT] or [FRONT RIGHT] is selected in
[POSITION] (page 24).
•
The [CUSTOM] setting is not available when
[OFF] is selected in [SUBWOOFER] (page 23).
SAVE SETTINGS
[YES], [NO]
Save to later recall the following sound settings
at their current values: [CROSSOVER], [SPEAKER
LEVEL], [EQ SETTING], [POSITION], [TIME
ALGNMNT], [D.BASS], [SUBWOOFER].
•
The settings that can be saved differ when a
Pioneer Smart Sync connection is made.
LOAD SETTINGS
Load the sound settings, when you have already
performed [SAVE SETTINGS].
D.BASS
[OFF], [LOW], [HI]
Boost the bass level dynamically to offer an
effect as if a subwoofer was added to the system.
Menu Item
Description
