22
> Install
> Playback
|
| Others
E
N
0
You can make Wi-Fi connection settings using a web browser on a computer. For details,
refer to “Web Setup” ( P23).
∫
DHCP
"On (Default Value)": Auto configuration by DHCP
"Off": Manual configuration without DHCP
If selecting "Off", you must set "IP Address", "Subnet Mask", "Gateway", and "DNS Server"
manually.
∫
IP Address
Displays/Sets the IP address.
∫
Subnet Mask
Displays/Sets the subnet mask.
∫
Gateway
Displays/Sets the gateway.
∫
DNS Server
Displays/Sets the primary DNS server.
∫
Proxy URL
Displays/Sets the proxy server URL.
∫
Proxy Port
Displays/Sets the proxy server port number when you enter "Proxy URL".
∫
Friendly Name
Change the device name for this unit which is shown on other devices connected to the
network to an easily recognized name. You can input up to 31 characters. For details on how
to enter text, refer to "Entering text" ( P19). After finishing input, press ENTER.
∫
AirPlay Password
You can set a password of up to 31 characters so that only registered users can use AirPlay.
For details on how to enter text, refer to "Entering text" (
P19). After finishing input, press
ENTER.
∫
Network Check
You can check the network connection.
Option Setting
∫
Power Off Setting
∫
Digital Filter
"Slow": Soft and fluid sound
"Sharp" (Default Value): Sound with more structure and firmness
"Short": Sound that starts quick and seems to move forward "Short"
∫
Language
Select the language displayed on the display.
English (Default Value), German, French, Spanish, Italian, Dutch, Swedish, Russian,
Chinese
System Info
The MAC address of this unit and the current firmware version will be displayed.
Auto Standby
This setting places the unit on standby automatically after 20
minutes of inactivity without any audio input.
"On" (Default Value): The unit will automatically enter standby
mode.
"Off": The unit will not automatically enter standby mode.
Network Standby
When this feature is turned "On", you can turn on the power of the
unit via the network using an application that can control this unit.
0
Setting to "On" (Default Value) increases the power
consumption even when the unit is on standby.
0
"Network Standby", which suppresses power consumption,
may be disabled when the network connection is lost.