44
11
11
Getting started (Stereo receiver: SX-P01, SX-P01DAB)
To turn the power on
Press the
I SYSTEM ON
button on the remote control to turn
on both of the stereo receiver and network audio player.
To turn on the stereo receiver only:
Press the
RECEIVER
button on the remote control or the
/
I
STANDBY/ON
button on the stereo receiver.
Setting the clock
In this example, the clock is set to the 24-hour (0:00) display.
1
Turn on the stereo receiver.
Refer to
To turn the power on
above for details.
2
Press the CONTROL RCV button on the remote control.
3
Press the CLOCK button on the remote control.
The current day and time are displayed.
The default setting (Sun 0:00) is displayed when the first time
you set the clock.
4
Press ENTER button.
5
Use
/
to set the day, then press ENTER.
6
Use
/
to select 24-hour or 12-hour display, then
press ENTER.
7
Use
/
to set the hour, then press ENTER.
8
Use
/
to set the minute, then press ENTER to
confirm.
Note
•
Press the
CLOCK
or
RETURN
button to exit the setting
mode without setting the clock.
To confirm the time display:
Press the
CLOCK
button. The current time and day are
displayed in the front panel display of the stereo receiver for 5
seconds.
Note
•
The current time and day display is canceled if;
-
the volume is adjusted.
-
the
SETUP
,
BASS +/–
,
/–
,
DIRECT
, or
SLEEP
button is pressed.
-
the stereo receiver is turned off.
-
the input source for the stereo receiver is changed.
To readjust the clock:
Perform “Setting the clock” from step 1.
Note
•
If the AC power cord of the stereo receiver is disconnected
from the wall socket, the clock setting is cleared. Set the
clock.
To change the 24-hour or 12-hour display:
1
Clear all the programmed contents.
Refer to
Resetting this player
on page 36 for details.
2
Perform “Setting the clock” from step 1 onwards.
General functions
Display brightness control
Press the
CONTROL RCV
button on the remote control.
Press
DIMMER
button to dim the display brightness. The
brightness can be controlled in four steps.
Volume control
Press the
/–
on the remote control to increase or
decrease volume, or turn the
VOLUME
knob on the stereo
receiver to the right to increase volume, and to the left to
decrease the volume.
CAUTION
•
The sound level at a given volume setting depends on
speaker efficiency, location, and various other factors. It is
advisable to avoid exposure to high volume levels. Do not
turn the volume on to full at switch on. Listen to music at
moderate levels. Excessive sound pressure from earphones
and headphones can cause hearing loss.
Note
•
If you turn off and on the stereo receiver with the volume set
to 61 or higher, the volume starts at 60.
•
When the DIRECT function is off, the volume can be set
from minimum to 60.
SYSTEM ON RECEIVER
CD
NETWORK
CONTROL
CLOCK
TIMER
SLEEP
DIMMER
NET
CD
RCV
SYSTEM OFF
TREBLE
BASS
BT AUDIO
iPod/USB
DIG IN 1/2
M.SERVER
CD/USB CD
USB
BAND
FAVORITES
TUNER
DIRECT
NETWORK
NET SERVICE
CLOCK
TIMER
SLEEP
DIMMER
VOLUME
RETURN
MUTE
PTY
AUTO TUNE
SETUP
DISPLAY
iPod CONTROL
TOP
MENU
TUNE
P
R
E
S
E
T
TUNE
ENTER
RDS DISP
P
R
E
S
E
T
The time is displayed in the 24-hour
display format (0:00 – 23:59).
The time is displayed in the 12-hour
display format (AM 0:00 – PM
11:59).
CLOCK
TIMER
SLEEP
DIMMER
VOLUME
RETURN
MUTE
PTY
AUTO TUNE
SETUP
DISPLAY
iPod CONTROL
TOP
MENU
TUNE
P
R
E
S
E
T
TUNE
ENTER
RDS DISP
P
R
E
S
E
T
SYSTEM ON RECEIVER
CD
NETWORK
CONTROL
NET
CD
RCV
SYSTEM OFF
TREBLE
BASS
BT AUDIO
iPod/USB
DIG IN 1/2
M.SERVER
CD/USB CD
USB
BAND
FAVORITES
TUNER
DIRECT
NETWORK
NET SERVICE
