5
En
English
Names of Parts
Front panel
NXS-GW
ON
ALERT
PRO DJ LINK
INTERNET
1
2
3
4
5
1
/ON switch
Press to turn the power on and off.
2
ON indicator
Lights when this unit’s power is on.
3
ALERT indicator
!
Flashing: This unit’s functions are restricted. Contact your store of purchase or a service center (page 10).
!
Off: The indicator is off when the power is off, or when the power is on and the unit is operating normally.
4
PRO DJ LINK indicator
!
Lit: This indicator lights when a PRO DJ LINK compatible DJ device is connected to this unit and this system can be used.
!
Flashing: The indicator flashes when a PRO DJ LINK compatible DJ device is connected to this unit but this system cannot be used (page 10).
!
Off: The indicator is off when nothing is connected or when the power of the device connected to this unit is off.
5
INTERNET indicator
!
Lit: This indicator lights when communications with the web server have been verified and this system can be used.
!
Flashing: The indicator flashes when communications with the web server have been verified but registration of the club information has not
been completed (page 10).
!
Off: The indicator is off when nothing is connected or communications with the web server cannot be verified.
Rear panel
AC IN
INTERNET
PRO DJ LINK
1
2
3
4
1
AC IN
Connects to a power outlet using the included power cord. Wait until all connections between the equipment are completed before connecting the
power cord.
2
INTERNET terminal
Connect to a router, etc., that is connected to the Internet.
3
PRO DJ LINK terminal
Connect to the [
LINK
] terminal of a PRO DJ LINK compatible Pioneer DJ mixer or to a switching hub (commercially available).
Use a 100Base-TX-compatible switching hub. Some switching hubs may not operate properly.
4
Kensington security slot
CAUTION
Do not connect the LAN port to any network which are subject to overvoltages.
