background image

140

Passport DCT Customer Service Guide

........................................................................................

Setting Up Your VCR Controls

7

If the recording started, you receive another message indicating that your setup is now 
complete.

8

Press the EXIT button to exit the Settings menu.

Note: In the event that Passport DCT is unable to complete the setup of the VCR, you will see a message. 

Starting Your VCR on Impulse

• Be sure that your VCR is turned on.

• Be sure that there is a recordable blank tape in your VCR. If you are reusing a tape, be sure that 

the record tabs have not been removed. 

• You must have completed the previous procedure and your VCR must have been setup.

• Make sure that a scheduled timer has not been set for the same time that you want to impulse 

record. If so, you are not able to record; the scheduled timers and PPV purchases always take 
precedence over an impulse recording.

Starting your VCR

1

Using your settop remote, press the REC button to start recording. Make sure that the remote 
is set for CABLE.

• If you have setup your VCR Controller, the following display appears.

Summary of Contents for passport DCT





























































































































































Reviews: