Playback
04
9
En
English
Deutsch
Français
Nederlands
Italiano
Español
Ру
сский
iPod/USB
iPod/iPhone/iPad playback
(PD-30 only)
Merely by connecting your iPod/iPhone/iPad to this unit,
you can enjoy high-quality sound from your iPod/iPhone/
iPad.
Confirm what iPod/iPhone/iPad models are
supported
The iPod/iPhone/iPad playable on this unit are shown
below.
• This system has been developed and tested for the
software version of iPod/iPhone/iPad indicated on
the website of Pioneer.
• Installing software versions other than indicated on
the website of Pioneer to your iPod/iPhone/iPad
may result in incompatibility with this system.
Note
• Pioneer does not guarantee that this unit plays
iPod/iPhone/iPad models other than the ones
specified.
• Some functions may be restricted depending on
the model or software version.
• iPod/iPhone/iPad is licensed for reproduction of
non-copyrighted materials or materials the user is
legally permitted to reproduce.
• Features such as the equalizer cannot be controlled
using this system, and we recommend switching
the equalizer off before connecting.
• Pioneer cannot under any circumstances accept
responsibility for any direct or indirect loss arising
from any inconvenience or loss of recorded
material resulting from iPod/iPhone/iPad failure.
• For detailed instructions on using the iPod/iPhone/
iPad, please refer to the manual supplied with the
iPod/iPhone/iPad.
Playing your iPod/iPhone/iPad
1
Press iPod/USB on the remote
control to select iPod as the input
source.
Press the remote control’s
iPod/USB
button.
• You can also perform the same operation by
pressing the
FUNCTION
on the front panel
repeatedly.
2
Connect your iPod/iPhone/iPad.
Connect your iPod/iPhone/iPad to the USB port on the
unit’s front panel. Use the iPod cable supplied with your
iPod/iPhone/iPad for the connection.
• For the cable connection, also refer to the operating
instructions for your iPod/iPhone/iPad.
iPod/iPhone/iPad
Audio
Control
iPod nano 2/3/4/5/6G
iPod touch 1/2/3/4G
iPhone
iPhone 3G/3GS
iPhone 4/4S
iPad
iPad 2
iPod/iPhone/iPad
iPod cable
The following operations are possible for iPod/iPhone/
iPad.
Important
If this unit cannot play your iPod/iPhone/iPad, perform
the following troubleshooting checks:
• Check whether the iPod/iPhone/iPad is supported
by this unit.
• Reconnect the iPod/iPhone/iPad to the unit. If this
doesn’t seem to work, try resetting your iPod/
iPhone/iPad.
• Check the iPod/iPhone/iPad software is supported
by this unit.
If the iPod/iPhone/iPad cannot be operated, check the
following items:
• Is the iPod/iPhone/iPad connected correctly?
Reconnect the iPod/iPhone/iPad to the unit.
• Is the iPod/iPhone/iPad experiencing a hangup? Try
resetting the iPod/iPhone/iPad, and reconnect it to
the unit.
Note
• iPod/iPhone/iPad recharging occurs whenever an
iPod/iPhone/iPad is connected to this unit.
(Recharging is enabled only when the unit’s power
is turned ON.) (does not apply when pure audio
function is ON)
• When input is switched from iPod to another
function, the iPod/iPhone/iPad’s playback will be
stopped automatically.
Button
What it does
Starts playback. During playback, pause/
unpause playback.
Pauses playback.
Press to skip to the start of the current file,
then previous files.
Hold depressed for fast reverse.
Press to skip to the next file.
Hold depressed for fast forward.
RANDOM
The currently selected iPod/iPhone/iPad
files are played back in random order
(shuffle play).
REPEAT
The currently selected iPod/iPhone/iPad
files are played back repeatedly.
1
1 Each time you press
REPEAT
the repeat modes
changes as below.
Repeat 1
Repeat all
Normal playback
Repeat 1: Repeats a file currently played back.
Repeat all: Repeats all files.
iPod MENU
Use when operating the iPod/iPhone/iPad
menu.
/
/ENTER
Use to perform iPod/iPhone/iPad menu
operations.
PD-30_PWSYXZT8.book 9 ページ 2012年5月7日 月曜日 午前11時33分