En-
15
Basic Operation
To turn on the CD Player, press the
[
Í
STANDBY/ON] button on the unit or the remote
controller. Press the [
Í
STANDBY/ON] button
again to set the CD Player to Standby.
You can specify that if the CD Player is left stopped
for 30 minutes, the power will automatically turn off,
placing the unit in Standby mode (Auto Standby
function).
On the North American model:
The default setting is “Off”.
On the European model:
The default setting is “On”.
Make settings for this function while playback is
stopped.
1
Press the [SETUP] button.
2
Use the
[
] or [ ] button to display “ASb”;
then press the [ ENTER ] button.
3
Use the [
] or [ ] button to switch “Off” or
“On”; then press the [ ENTER ] button.
4
“COMPLETE” appears on the display.
Note:
If playback is paused, the power will remain on
even after 30 minutes have elapsed; the Auto
Standby function will not operate.
Press the remote controller’s [DIMMER]
button repeatedly to select the following
options:
Turn down the volume, then connect your stereo
headphones to the [PHONES] jack.
You can adjust the volume by using the [PHONES
LEVEL] knob.
Turning On CD Player
Setting Auto Standby (ASb)
STANDBY/ON
STANDBY/ON
ENTER
SETUP
Changing the Display Brightness
Using Headphones
Normal
Dim
Dimmer
PHONES
jack
SN229402408_PD-30AE_En.book 15 ページ ２０１６年７月２８日 木曜日 午前８時１６分
