Pioneer PD-F1009 - CD Changer Service Manual Download

Page: 51 / 60

PD-F1009

User

Display

Contents

None

• Disc playing was tried after loading, but

the disc could not be detected because
there was no disc,
the disc was upside down,
the disc was dirty, disc loading had not
been completed, etc.

• Focus was lost during disc playing

because of disc scratches, dirt, etc.

None

• At the time of track selection during play,

or when trying to play, the servo
mechanism could not move to the position
of the intended track within a fixed time.

• Disc loading was tried, but loading was

not possible within a fixed time. (The disc
was not brought from the rack.)

• It was tried to return the disc to the rack,

but the disc could not be returned within
a fixed time.

• At the time of disc selection during play,

or at the start of play from stopped
condition, the selection mechanism could
not move to the position of the intended
disc within a fixed time.

• After initialization of the selection

mechanism, after selection mechanism
NG, etc., forced rack section position
detection is performed for the selection
mechanism, but detection was not
possible within a fixed time.

None

• Playing was tried after disc loading, but

normal disc rotation was not possible
because
the disc was upside down,
the disc was dirty,
disc loading had not been completed, etc.

• During play normal rotation was not

possible because of disc scratches, dirt,
etc.

Display

Contents

During spindle stop operation

During disc return

During disc selection (during clamping operation
at the time of 26)

During setup

During CDR setup operation

During TOC reading

During search operation on the disc

During play operation

During pause operation

During manual search

7.1.2 ERROR CHECK DISPLAY

DISC

TRACK

MIN

SEC

SINGLE

ALL

RDM RPT 1

CD TEXT

CUSTOM

PGM

PREVIOUS DISC SCAN BEST

Error Code

Error History

Error Occurrence Mode

Error check mode (display of the error history for the last 16 times)
is entered when the "TIME/CHARA" button is pressed in test
mode. By looking at this display, it can be seen in which status the
microcomputer has stopped.

(1) Explanation of the display

Disc No. = Error code
Track No. = Error history
Min : sec = Error occurrence mode

Press the "TIME/CHARA" button again to check past error codes.
This switches the display. The contents of each display are as
follows.

Track No.: Error History

Display is possible from 1 to 16. The smaller numbers have
occurred more recently. Accordingly, the error No. 1 is the error
which has occurred most recently.

Min : sec: Error Occurrence Mode

The internal mode at the time of occurrence of the displayed error
is displayed. With Min : sec, the meaning is provided by the first
digit.

Minutes digits

Display

Contents

During hood closing operation and closed condition

During hood opening operation and open condition

Seconds digits

Disc No.: Error Code Details

Note: A used display is displayed only when return to normal

operation after error occurrence is not possible even when
failsafe operation is performed.

<<< Rack Section >>>