Using the unit with a Pioneer plasma television
08
16
En
Chapter 8
Using the unit with a Pioneer plasma
television
Follow these procedures when connecting this unit to a
Pioneer plasma television.
The ability to use the HDMI Control function depends in
part on the specifications of the plasma television; as a
result, please consult the Operating Instructions for
your plasma television if you desire to use HDMI
Control.
Be sure that the power switches of both plasma
television and this unit are set to off before making
connections and settings.
1
Set this unit’s rear panel HDMI CONTROL switch
to ON.
2
Connect this unit to other components.
• Be sure power is turned off before making
connections.
• Regarding connections, see section
Using with
other components
on page 21.
• When using the plasma television’s remote signal
receiver to control this unit, consult the section
Connecting control cables
on page 18.
3
Turn power on.
• Turn power on only after connecting all other
components.
4
Confirm that the HDMI CONTROL indicator
lights orange.
5
On the plasma television’s “HDMI Control
Setting” menu, set to allow control of this unit.
• For details, see the plasma television’s Operating
Instructions.
6
Confirm that the HDMI CONTROL indicator has
changed from orange to green.
7
Select the input.
• Confirm that the input can be changed using the
plasma television’s remote control unit.
When turning power off:
If the plasma television’s “HDMI Control Setting” menu
is used to link the power controls, when the plasma
television’s remote control is used to turn the
television’s power off, this unit’s power will
simultaneously turn off.
HDMI
OUTPUT
INPUT 1
INPUT 3
INPUT 4
INPUT 6
INPUT 1
INPUT 2
HDMI
CONTROL
SERVICE ONLY
CONTROL
COMPONENT
VIDEO
AUDIO
L
R
L
R
AUDIO
I N
OUT
Y
PB
PR
ON/OFF
INPUT 3
INPUT 4
AUDIO
L
R
INPUT 5
S-VIDEO
VIDEO
R-AUDIO-L
AC IN
System composition example using HDMI connections
This unit
Plasma television
Input components
HDMI CONTROL switch
HDMI compliant cable
HDMI compliant cable
HDMI
CONTROL
ON/OFF
