Advanced functions
10
19
En
English
Changing settings
Changing HDMI output resolution
When converting analog input signals to HDMI, the
output resolution must be set.
This setting is supported when the currently selected
input is INPUT 2, INPUT 3 (SCART), or INPUT 5.
•
Press the remote control unit’s RESOLUTION
button.
The following items can be set:
Note
• Under normal conditions, leave this set to Auto.
Selecting the colour system
Select the colour system for analog input signals.
This setting is supported when the currently selected
input is INPUT 3 (SCART), or INPUT 5.
•
Press the remote control unit’s COLOUR
SYSTEM button.
The system can be set to Auto (default), PAL, SECAM,
NTSC, 4.43NTSC or PAL60.
Note
• Under normal conditions, leave this set to Auto.
Selecting the INPUT3 source signal
Select the INPUT 3 source signal.
•
Press the remote control unit’s SIGNAL SELECT
button.
The signal can be selected from among VIDEO
(default), S-VIDEO, RGB, or HDMI.
Item
Description
Auto
(default)
Resolution is set automatically in
response to the input signal.
480p/576p
Switch to 480p/576p resolution
720p
Switch to 720p resolution
1080i
Switch to 1080i resolution
INPUT
SETTING
RESOLUTION
COLOUR
SYSTEM
SIGNAL
SELECT
1
2
3
4
5
6
INPUT
SETTING
RESOLUTION
COLOUR
SYSTEM
SIGNAL
SELECT
1
2
3
4
5
6
INPUT
SETTING
RESOLUTION
COLOUR
SYSTEM
SIGNAL
SELECT
1
2
3
4
5
6
